lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] dt-binding: hwmon: Add NPCM7xx PWM documentation
Date
Added device tree binding documentation for Nuvoton BMC
NPCM7xx Pulse Width Modulation (PWM) controller.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
.../devicetree/bindings/hwmon/npcm7xx-pwm.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt

diff --git a/Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt b/Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt
new file mode 100644
index 000000000000..2d8a7ccdc8cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt
@@ -0,0 +1,25 @@
+Nuvoton NPCM7xx Pulse-width modulation (PWM) controller device driver
+
+The NPCM7xx has two identical PWM controller modules,
+Each module has four PWM controller outputs.
+NPCM7xx PWM controller module 0 outputs PWM0-3 and NPCM7xx PWM controller
+module 1 outputs PWM4-7.
+
+Required properties:
+- compatible : "nuvoton,npcm750-pwm" for Poleg NPCM7XX.
+- reg : Offset and length of the registers set for the device.
+- clocks : phandle of pwm reference clock.
+- pinctrl-names : a pinctrl state named "default" must be defined.
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+pwm:pwm@f0103000 {
+ compatible = "nuvoton,npcm750-pwm";
+ reg = <0xf0103000 0x50
+ 0xf0104000 0x50>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins
+ &pwm2_pins &pwm3_pins
+ &pwm4_pins &pwm5_pins
+ &pwm6_pins &pwm7_pins>;
+};
--
2.14.1
\
 
 \ /
  Last update: 2018-05-29 12:16    [W:0.113 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site