lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/9] PM / Domains: Don't attach devices in genpd with multi PM domains
Date
The power-domain DT property may now contain a list of PM domain
specifiers, which represents that a device are partitioned across multiple
PM domains. This leads to a new situation in genpd_dev_pm_attach(), as only
one PM domain can be attached per device.

To remain things simple for the most common configuration, when a single PM
domain is used, let's treat the multiple PM domain case as being specific.

In other words, let's change genpd_dev_pm_attach() to check for multiple PM
domains and prevent it from attach any PM domain for this case. Instead,
leave this to be managed separately, from following changes to genpd.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

Changes in v2:
- Minor update to changelog to mention "PM domain specifiers" rather
than a "list of phandles".

---
drivers/base/power/domain.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 7ebf7993273a..12a20f21974d 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2229,10 +2229,10 @@ static void genpd_dev_pm_sync(struct device *dev)
* attaches the device to retrieved pm_domain ops.
*
* Returns 1 on successfully attached PM domain, 0 when the device don't need a
- * PM domain or a negative error code in case of failures. Note that if a
- * power-domain exists for the device, but it cannot be found or turned on,
- * then return -EPROBE_DEFER to ensure that the device is not probed and to
- * re-try again later.
+ * PM domain or when multiple power-domains exists for it, else a negative error
+ * code. Note that if a power-domain exists for the device, but it cannot be
+ * found or turned on, then return -EPROBE_DEFER to ensure that the device is
+ * not probed and to re-try again later.
*/
int genpd_dev_pm_attach(struct device *dev)
{
@@ -2243,10 +2243,18 @@ int genpd_dev_pm_attach(struct device *dev)
if (!dev->of_node)
return 0;

+ /*
+ * Devices with multiple PM domains must be attached separately, as we
+ * can only attach one PM domain per device.
+ */
+ if (of_count_phandle_with_args(dev->of_node, "power-domains",
+ "#power-domain-cells") != 1)
+ return 0;
+
ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
"#power-domain-cells", 0, &pd_args);
if (ret < 0)
- return 0;
+ return ret;

mutex_lock(&gpd_list_lock);
pd = genpd_get_from_provider(&pd_args);
--
2.17.0
\
 
 \ /
  Last update: 2018-05-29 12:06    [W:0.154 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site