lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 0/2] Initial Allwinner V3s CSI Support
On Thu, May 17, 2018 at 11:02:24AM +0200, Maxime Ripard wrote:
> On Fri, May 04, 2018 at 02:44:08PM +0800, Yong Deng wrote:
> > This patchset add initial support for Allwinner V3s CSI.
> >
> > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> > interface and CSI1 is used for parallel interface. This is not
> > documented in datasheet but by test and guess.
> >
> > This patchset implement a v4l2 framework driver and add a binding
> > documentation for it.
> >
> > Currently, the driver only support the parallel interface. And has been
> > tested with a BT1120 signal which generating from FPGA. The following
> > fetures are not support with this patchset:
> > - ISP
> > - MIPI-CSI2
> > - Master clock for camera sensor
> > - Power regulator for the front end IC
>
> I tested it on my H3 with a parallel camera, and it still works. Thanks!
>
> Hans, Sakari, any chance this might land in 4.18?

Ping?

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-05-29 12:05    [W:0.088 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site