lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] arm: dts: Change PCIe INTx mapping for HR2
Date
Change the PCIe INTx mapping to model the 4 INTx interrupts in the
IRQ domain of the iProc PCIe controller itself

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
arch/arm/boot/dts/bcm-hr2.dtsi | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 3f9cedd..20e3161 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -298,9 +298,14 @@
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;

+ interrupt-controller;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0 1>,
+ <0 0 0 2 &pcie0 2>,
+ <0 0 0 3 &pcie0 3>,
+ <0 0 0 4 &pcie0 4>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_NONE>;

linux,pci-domain = <0>;

@@ -334,9 +339,14 @@
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;

+ interrupt-controller;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1 1>,
+ <0 0 0 2 &pcie1 2>,
+ <0 0 0 3 &pcie1 3>,
+ <0 0 0 4 &pcie1 4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;

linux,pci-domain = <1>;

--
2.1.4
\
 
 \ /
  Last update: 2018-05-30 00:01    [W:0.176 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site