lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] reset: imx7: Fix always writing bits as 0
Date
Right now the only user of reset-imx7 is pci-imx6 and the
reset_control_assert and deassert calls on pciephy_reset don't toggle
the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
1 or 0 respectively.

The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
other registers like MIPIPHY and HSICPHY the bits are explicitly
documented as "1 means assert, 0 means deassert".

The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
drivers/reset/reset-imx7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 4db177bc89bc..fdeac1946429 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -78,11 +78,11 @@ static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
static int imx7_reset_set(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct imx7_src *imx7src = to_imx7_src(rcdev);
const struct imx7_src_signal *signal = &imx7_src_signals[id];
- unsigned int value = 0;
+ unsigned int value = assert ? signal->bit : 0;

switch (id) {
case IMX7_RESET_PCIEPHY:
/*
* wait for more than 10us to release phy g_rst and
--
2.17.0
\
 
 \ /
  Last update: 2018-05-29 21:40    [W:0.898 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site