lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/15] fsi/gpio: Use relative-addressing commands
Date
From: Jeremy Kerr <jk@ozlabs.org>

FSI CFAMs support shorter commands that use a relative (or same) address
as the last. This change introduces a last_addr to the master state, and
uses it for subsequent reads/writes, and performs relative addressing
when a subsequent read/write is in range.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-master-gpio.c | 102 ++++++++++++++++++++++++++++++----
1 file changed, 91 insertions(+), 11 deletions(-)

diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index d50ea4849377..0a6799bda294 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -28,6 +28,8 @@
#define FSI_GPIO_CMD_DPOLL 0x2
#define FSI_GPIO_CMD_TERM 0x3f
#define FSI_GPIO_CMD_ABS_AR 0x4
+#define FSI_GPIO_CMD_REL_AR 0x5
+#define FSI_GPIO_CMD_SAME_AR 0x3 /* but only a 2-bit opcode... */


#define FSI_GPIO_DPOLL_CLOCKS 50 /* < 21 will cause slave to hang */
@@ -52,6 +54,8 @@
#define FSI_GPIO_MSG_RESPID_SIZE 2
#define FSI_GPIO_PRIME_SLAVE_CLOCKS 20

+#define LAST_ADDR_INVALID 0x1
+
struct fsi_master_gpio {
struct fsi_master master;
struct device *dev;
@@ -64,6 +68,7 @@ struct fsi_master_gpio {
struct gpio_desc *gpio_mux; /* Mux control */
bool external_mode;
bool no_delays;
+ uint32_t last_addr;
};

#define CREATE_TRACE_POINTS
@@ -205,22 +210,89 @@ static void msg_push_crc(struct fsi_gpio_msg *msg)
msg_push_bits(msg, crc, 4);
}

+static bool check_same_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr)
+{
+ /* this will also handle LAST_ADDR_INVALID */
+ return master->last_addr == (((id & 0x3) << 21) | (addr & ~0x3));
+}
+
+static bool check_relative_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr, uint32_t *rel_addrp)
+{
+ uint32_t last_addr = master->last_addr;
+ int32_t rel_addr;
+
+ if (last_addr == LAST_ADDR_INVALID)
+ return false;
+
+ /* We may be in 23-bit addressing mode, which uses the id as the
+ * top two address bits. So, if we're referencing a different ID,
+ * use absolute addresses.
+ */
+ if (((last_addr >> 21) & 0x3) != id)
+ return false;
+
+ /* remove the top two bits from any 23-bit addressing */
+ last_addr &= (1 << 21) - 1;
+
+ /* We know that the addresses are limited to 21 bits, so this won't
+ * overflow the signed rel_addr */
+ rel_addr = addr - last_addr;
+ if (rel_addr > 255 || rel_addr < -256)
+ return false;
+
+ *rel_addrp = (uint32_t)rel_addr;
+
+ return true;
+}
+
+static void last_address_update(struct fsi_master_gpio *master,
+ int id, bool valid, uint32_t addr)
+{
+ if (!valid)
+ master->last_addr = LAST_ADDR_INVALID;
+ else
+ master->last_addr = ((id & 0x3) << 21) | (addr & ~0x3);
+}
+
/*
- * Encode an Absolute Address command
+ * Encode an Absolute/Relative/Same Address command
*/
-static void build_abs_ar_command(struct fsi_gpio_msg *cmd,
- uint8_t id, uint32_t addr, size_t size, const void *data)
+static void build_ar_command(struct fsi_master_gpio *master,
+ struct fsi_gpio_msg *cmd, uint8_t id,
+ uint32_t addr, size_t size, const void *data)
{
+ int i, addr_bits, opcode_bits;
bool write = !!data;
- uint8_t ds;
- int i;
+ uint8_t ds, opcode;
+ uint32_t rel_addr;

cmd->bits = 0;
cmd->msg = 0;

- msg_push_bits(cmd, id, 2);
- msg_push_bits(cmd, FSI_GPIO_CMD_ABS_AR, 3);
- msg_push_bits(cmd, write ? 0 : 1, 1);
+ /* we have 21 bits of address max */
+ addr &= ((1 << 21) - 1);
+
+ /* cmd opcodes are variable length - SAME_AR is only two bits */
+ opcode_bits = 3;
+
+ if (check_same_address(master, id, addr)) {
+ /* we still address the byte offset within the word */
+ addr_bits = 2;
+ opcode_bits = 2;
+ opcode = FSI_GPIO_CMD_SAME_AR;
+
+ } else if (check_relative_address(master, id, addr, &rel_addr)) {
+ /* 8 bits plus sign */
+ addr_bits = 9;
+ addr = rel_addr;
+ opcode = FSI_GPIO_CMD_REL_AR;
+
+ } else {
+ addr_bits = 21;
+ opcode = FSI_GPIO_CMD_ABS_AR;
+ }

/*
* The read/write size is encoded in the lower bits of the address
@@ -237,7 +309,10 @@ static void build_abs_ar_command(struct fsi_gpio_msg *cmd,
if (size == 4)
addr |= 1;

- msg_push_bits(cmd, addr & ((1 << 21) - 1), 21);
+ msg_push_bits(cmd, id, 2);
+ msg_push_bits(cmd, opcode, opcode_bits);
+ msg_push_bits(cmd, write ? 0 : 1, 1);
+ msg_push_bits(cmd, addr, addr_bits);
msg_push_bits(cmd, ds, 1);
for (i = 0; write && i < size; i++)
msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
@@ -481,8 +556,9 @@ static int fsi_master_gpio_read(struct fsi_master *_master, int link,
return -ENODEV;

mutex_lock(&master->cmd_lock);
- build_abs_ar_command(&cmd, id, addr, size, NULL);
+ build_ar_command(master, &cmd, id, addr, size, NULL);
rc = fsi_master_gpio_xfer(master, id, &cmd, size, val);
+ last_address_update(master, id, rc == 0, addr);
mutex_unlock(&master->cmd_lock);

return rc;
@@ -499,8 +575,9 @@ static int fsi_master_gpio_write(struct fsi_master *_master, int link,
return -ENODEV;

mutex_lock(&master->cmd_lock);
- build_abs_ar_command(&cmd, id, addr, size, val);
+ build_ar_command(master, &cmd, id, addr, size, val);
rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, rc == 0, addr);
mutex_unlock(&master->cmd_lock);

return rc;
@@ -519,6 +596,7 @@ static int fsi_master_gpio_term(struct fsi_master *_master,
mutex_lock(&master->cmd_lock);
build_term_command(&cmd, id);
rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, false, 0);
mutex_unlock(&master->cmd_lock);

return rc;
@@ -552,6 +630,7 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
clock_toggle(master, FSI_POST_BREAK_CLOCKS);

spin_unlock_irqrestore(&master->bit_lock, flags);
+ last_address_update(master, 0, false, 0);
mutex_unlock(&master->cmd_lock);

/* Wait for logic reset to take effect */
@@ -662,6 +741,7 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
master->dev = &pdev->dev;
master->master.dev.parent = master->dev;
master->master.dev.of_node = of_node_get(dev_of_node(master->dev));
+ master->last_addr = LAST_ADDR_INVALID;

gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
if (IS_ERR(gpio)) {
--
2.17.0
\
 
 \ /
  Last update: 2018-05-29 04:07    [W:0.118 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site