Messages in this thread | | | Date | Sun, 27 May 2018 10:30:01 +0100 | From | Jonathan Cameron <> | Subject | Re: [PATCH 1/2] iio: 104-quad-8: Fix off-by-one error in register selection |
| |
On Thu, 24 May 2018 16:37:46 -0400 William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> The reset flags operation is selected by bit 2 in the "Reset and Load > Signals Decoders" register, not bit 1. > > Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") > Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Hmm. Given timing I'm not sure on the quickest route to upstream this.
Hence I'm going to take it via the togreg tree but might move it if the merge window opens before I push that tree out other than as testing.
Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.
Thanks
Jonathan
> --- > drivers/iio/counter/104-quad-8.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c > index b56985078d8c..4be85ec54af4 100644 > --- a/drivers/iio/counter/104-quad-8.c > +++ b/drivers/iio/counter/104-quad-8.c > @@ -138,7 +138,7 @@ static int quad8_write_raw(struct iio_dev *indio_dev, > outb(val >> (8 * i), base_offset); > > /* Reset Borrow, Carry, Compare, and Sign flags */ > - outb(0x02, base_offset + 1); > + outb(0x04, base_offset + 1); > /* Reset Error flag */ > outb(0x06, base_offset + 1); >
| |