lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] arm64: dts: Update Stingray clock DT nodes
Date
Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++++++++++------
1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
reg = <0x0001d104 0x32>,
<0x0001c854 0x4>;
clocks = <&osc>;
- clock-output-names = "genpll0", "clk_125", "clk_scr",
+ clock-output-names = "genpll0", "clk_125m", "clk_scr",
"clk_250", "clk_pcie_axi",
"clk_paxc_axi_x2",
"clk_paxc_axi";
};

+ genpll2: genpll2@1d1ac {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll2";
+ reg = <0x0001d1ac 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll2", "clk_nic",
+ "clk_ts_500_ref", "clk_125_nitro",
+ "clk_chimp", "clk_nic_flash",
+ "clk_fs";
+ };
+
genpll3: genpll3@1d1e0 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
<0x0001c854 0x4>;
clocks = <&osc>;
clock-output-names = "genpll4", "clk_ccn",
- "clk_tpiu_pll", "noc_clk",
- "pll_chclk_fs4",
+ "clk_tpiu_pll", "clk_noc",
+ "clk_chclk_fs4",
"clk_bridge_fscpu";
};

@@ -86,8 +98,8 @@
reg = <0x0001d248 0x32>,
<0x0001c870 0x4>;
clocks = <&osc>;
- clock-output-names = "genpll5", "fs4_hf_clk",
- "crypto_ae_clk", "raid_ae_clk";
+ clock-output-names = "genpll5", "clk_fs4_hf",
+ "clk_crypto_ae", "clk_raid_ae";
};

lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@
reg = <0x0001d138 0x3c>,
<0x0001c870 0x4>;
clocks = <&osc>;
- clock-output-names = "lcpll1", "clk_wanpn",
+ clock-output-names = "lcpll1", "clk_wan",
"clk_usb_ref",
- "timesync_evt_clk";
+ "clk_crmu_ts";
};

hsls_clk: hsls_clk {
--
2.1.4
\
 
 \ /
  Last update: 2018-05-25 18:46    [W:1.135 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site