lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] arm64: dts: socionext: Add missing cooling device properties for CPUs
Date
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 3a5ed789c056..10ffb5019013 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -58,6 +58,7 @@
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};

cpu2: cpu@100 {
@@ -77,6 +78,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
};

--
2.15.0.194.g9af6a3dea062
\
 
 \ /
  Last update: 2018-05-25 07:42    [W:0.177 / U:2.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site