lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Problem: lockdep warning with nested instances of i2c-mux
Date
On 2018-05-24 04:25, John Sperbeck wrote:
> If an i2c topology has instances of nested muxes, then a lockdep splat
> is produced when when i2c_parent_lock_bus() is called. Here is an
> example:
>
> ============================================
> WARNING: possible recursive locking detected
> --------------------------------------------
> insmod/68159 is trying to acquire lock:
> (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]
>
> but task is already holding lock:
> (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]
>
> other info that might help us debug this:
> Possible unsafe locking scenario:
>
> CPU0
> ----
> lock(i2c_register_adapter#2);
> lock(i2c_register_adapter#2);
>
> *** DEADLOCK ***
>
> May be due to missing lock nesting notation
>
> 1 lock held by insmod/68159:
> #0: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50
> [i2c_mux]
>
> stack backtrace:
> CPU: 13 PID: 68159 Comm: insmod Tainted: G O
> Call Trace:
> dump_stack+0x67/0x98
> __lock_acquire+0x162e/0x1780
> lock_acquire+0xba/0x200
> rt_mutex_lock+0x44/0x60
> i2c_parent_lock_bus+0x32/0x50 [i2c_mux]
> i2c_parent_lock_bus+0x3e/0x50 [i2c_mux]
> i2c_smbus_xfer+0xf0/0x700
> i2c_smbus_read_byte+0x42/0x70
> my2c_init+0xa2/0x1000 [my2c]
> do_one_initcall+0x51/0x192
> do_init_module+0x62/0x216
> load_module+0x20f9/0x2b50
> SYSC_init_module+0x19a/0x1c0
> SyS_init_module+0xe/0x10
> do_syscall_64+0x6c/0x1a0
> entry_SYSCALL_64_after_hwframe+0x42/0xb7
>
>
> The warning makes sense from the lockdep detector's point-of-view because
> we are locking two instances of a single lock class. Normally, this would
> be addressed by using 'nested' variants of locks. But rt_mutex doesn't
> expose an API for that, and it's not clear how i2c-mux can know what level
> of nesting it's at anyway.

Yes, when I modified the i2c-mux locking a couple of years ago, I also
noted the absense, and even tried to implement it, but eventually gave
up. However, that was before lockdep could even track rt_mutexes. Now
it looks easy, and I will follow up with a couple of patches (only
compile-tested, please test).

> In short, I don't have an easy patch to suggest. But I'm not very
> familiar with the i2c code, and maybe I'm overlooking something that
> would help?
>
> I have code for a module that emulates a chain of an i2c adapter, two
> muxes, and a slave device to show the problem. On my system, with a
> kernel compiled with lockdep enabled, loading the module produces the
> splat. I can post it, if the issue isn't clear from my description.

Not needed, the issue is known, I just wasn't aware that lockdep had
grown knowledge of rt-mutexes.

Thanks for the report!

Cheers,
Peter

Peter Rosin (2):
rtmutex: allow specifying a subclass for nested locking
i2c: mux: annotate the nested rt_mutex usage

drivers/i2c/i2c-core-base.c | 2 +-
drivers/i2c/i2c-mux.c | 4 ++--
include/linux/rtmutex.h | 6 ++++++
kernel/locking/rtmutex.c | 29 +++++++++++++++++++++++++----
4 files changed, 34 insertions(+), 7 deletions(-)

--
2.11.0

\
 
 \ /
  Last update: 2018-05-24 09:33    [W:0.068 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site