lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 43/92] powerpc/powernv: Remove OPALv2 firmware define and references
Date
4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stewart Smith <stewart@linux.vnet.ibm.com>

commit 7261aafc095763b119136a562540dea7b1ccf657 upstream.

OPALv2 only ever existed in the lab and didn't escape to the world.
All OPAL systems in the wild are OPALv3.

The probability of there being an OPALv2 system still powered on
anywhere inside IBM is approximately zero, let alone anyone
expecting to run mainline kernels.

So, start to remove references to OPALv2.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/powerpc/include/asm/firmware.h | 4 +---
arch/powerpc/platforms/powernv/opal.c | 8 ++------
arch/powerpc/platforms/powernv/setup.c | 4 ----
arch/powerpc/platforms/powernv/smp.c | 4 ++--
4 files changed, 5 insertions(+), 15 deletions(-)

--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -47,7 +47,6 @@
#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000)
#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000)
#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000)
#define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000)
#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
@@ -70,8 +69,7 @@ enum {
FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
FW_FEATURE_PSERIES_ALWAYS = 0,
- FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 |
- FW_FEATURE_OPALv3,
+ FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv3,
FW_FEATURE_POWERNV_ALWAYS = 0,
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -100,7 +100,6 @@ int __init early_init_dt_scan_opal(unsig

powerpc_firmware_features |= FW_FEATURE_OPAL;
if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) {
- powerpc_firmware_features |= FW_FEATURE_OPALv2;
powerpc_firmware_features |= FW_FEATURE_OPALv3;
pr_info("OPAL V3 detected !\n");
} else {
@@ -349,7 +348,7 @@ int opal_put_chars(uint32_t vtermno, con
* enough room and be done with it
*/
spin_lock_irqsave(&opal_write_lock, flags);
- if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+ if (firmware_has_feature(FW_FEATURE_OPALv3)) {
rc = opal_console_write_buffer_space(vtermno, &olen);
len = be64_to_cpu(olen);
if (rc || len < total_len) {
@@ -693,10 +692,7 @@ static int __init opal_init(void)
}

/* Register OPAL consoles if any ports */
- if (firmware_has_feature(FW_FEATURE_OPALv2))
- consoles = of_find_node_by_path("/ibm,opal/consoles");
- else
- consoles = of_node_get(opal_node);
+ consoles = of_find_node_by_path("/ibm,opal/consoles");
if (consoles) {
for_each_child_of_node(consoles, np) {
if (strcmp(np->name, "serial"))
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -142,10 +142,6 @@ static void pnv_show_cpuinfo(struct seq_
seq_printf(m, "machine\t\t: PowerNV %s\n", model);
if (firmware_has_feature(FW_FEATURE_OPALv3))
seq_printf(m, "firmware\t: OPAL v3\n");
- else if (firmware_has_feature(FW_FEATURE_OPALv2))
- seq_printf(m, "firmware\t: OPAL v2\n");
- else if (firmware_has_feature(FW_FEATURE_OPAL))
- seq_printf(m, "firmware\t: OPAL v1\n");
else
seq_printf(m, "firmware\t: BML\n");
of_node_put(root);
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -65,10 +65,10 @@ static int pnv_smp_kick_cpu(int nr)
BUG_ON(nr < 0 || nr >= NR_CPUS);

/*
- * If we already started or OPALv2 is not supported, we just
+ * If we already started or OPALv3 is not supported, we just
* kick the CPU via the PACA
*/
- if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2))
+ if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv3))
goto kick;

/*

\
 
 \ /
  Last update: 2018-05-24 11:45    [W:0.643 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site