lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv5 1/8] dt-bindings, firmware: add Intel Stratix10 service layer binding
On Thu, May 24, 2018 at 11:33:13AM -0500, richard.gong@linux.intel.com wrote:
> From: Richard Gong <richard.gong@intel.com>
>
> Add a device tree binding for the Intel Stratix10 service layer driver
>
> Signed-off-by: Richard Gong <richard.gong@intel.com>
> Signed-off-by: Alan Tull <atull@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
> ---
> v2: Change to put service layer driver node under the firmware node
> Change compatible to "intel, stratix10-svc"
> v3: No change
> v4: Add Rob's Reviewed-by
> v5: No change
> ---
> .../bindings/firmware/intel,stratix10-svc.txt | 57 ++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
>
> diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
> new file mode 100644
> index 0000000..1fa6606
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
> @@ -0,0 +1,57 @@
> +Intel Service Layer Driver for Stratix10 SoC
> +============================================
> +Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
> +processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
> +configured from HPS, there needs to be a way for HPS to notify SDM the
> +location and size of the configuration data. Then SDM will get the
> +configuration data from that location and perform the FPGA configuration.
> +
> +To meet the whole system security needs and support virtual machine requesting
> +communication with SDM, only the secure world of software (EL3, Exception
> +Layer 3) can interface with SDM. All software entities running on other
> +exception layers must channel through the EL3 software whenever it needs
> +service from SDM.
> +
> +Intel Stratix10 service layer driver, running at privileged exception level
> +(EL1, Exception Layer 1), interfaces with the service providers and provides
> +the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
> +driver also manages secure monitor call (SMC) to communicate with secure monitor
> +code running in EL3.
> +
> +Required properties:
> +-------------------
> +The svc node has the following mandatory properties, must be located under
> +the firmware node.
> +
> +- compatible: "intel,stratix10-svc"
> +- method: smc or hvc
> + smc - Secure Monitor Call
> + hvc - Hypervisor Call
> +- memory-region:
> + phandle to the reserved memory node. See
> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> + for details
> +
> +Example:
> +-------
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + service_reserved: svcbuffer@0 {
> + compatible = "shared-dma-pool";
> + reg = <0x0 0x0 0x0 0x1000000>;
> + alignment = <0x1000>;
> + no-map;
> + };
> + };
> +
> + firmware {
> + svc {
> + compatible = "intel,stratix10-svc";
> + method = "smc";
> + memory-region = <&service_reserved>;
> + };
> + };
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2018-05-24 19:04    [W:1.354 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site