lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: hub: Per-port setting to use old enumeration scheme
On Thu, 24 May 2018, Nicolas Boichat wrote:

> On Thu, May 24, 2018 at 12:39 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > On Wed, May 23, 2018 at 10:03:55AM -0400, Alan Stern wrote:
> >> On Wed, 23 May 2018, Nicolas Boichat wrote:
> >>
> >> > The "old" enumeration scheme is considerably faster (it takes
> >> > ~294ms instead of ~439ms to get the descriptor).
> >> >
> >> > It is currently only possible to use the old scheme globally
> >> > (/sys/module/usbcore/parameters/old_scheme_first), which is not
> >> > desirable as the new scheme was introduced to increase compatibility
> >> > with more devices.
> >> >
> >> > However, in our case, we care about time-to-active for a specific
> >> > USB device (which we make the firmware for), on a specific port
> >> > (that is pogo-pin based: not a standard USB port). This new
> >> > sysfs option makes it possible to use the old scheme on a single
> >> > port only.
> >> >
> >> > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> >> > ---
> >> >
> >> > There are other "quirks" that we could add to reduce further
> >> > enumeration time (e.g. reduce USB debounce time, reduce TRSTRCY
> >> > to 10ms instead of 50ms as used currently), but the logic is quite
> >> > similar, so it'd be good to have this reviewed first.
> >>
> >> I'm not opposed to the idea in principle, although I don't like your
> >> implementation because it breaks the original old_scheme_first
> >> parameter.
>
> I don't think it breaks the original parameter? I mean,
> /sys/module/usbcore/parameters/old_scheme_first is still a global
> default, while bit 0 of /sys/bus/usb/devices/x/y/z/quirks becomes a
> port-specific override.

Oops, sorry, my mistake. My email client wrapped the last line of
use_new_scheme(), and as a result I missed the fact that
old_scheme_first was getting or'ed into the expression.

> >> How do you arrange to set the new quirk before the device is
> >> discovered?
> >
> > Yeah, this last question is what I had when looking at this. Or does it
> > not matter at first boot and only matters for wake-up?
>
> It does not matter on boot, we have plenty of time to enumerate the
> device. We use USB (auto-)suspend and remote wake, so no
> re-enumeration there either. It only matters on unplug/replug where
> the device needs to be re-enumerated.
>
> Somewhere in an init script, we would do this (we know in advance that
> usb1 port2 is the bus/port where we have our pogo-pin USB interface,
> so we can hard-code the path):
> echo 1 > /sys/bus/usb/devices/usb1/1-0:1.0/usb1-port2/quirks
>
> We could try to add ACPI support (just like connect_type), but we
> don't strictly need it for our application.

Okay, that makes sense. So this change looks okay to me.

Acked-by: Alan Stern <stern@rowland.harvard.edu>

Alan Stern

\
 
 \ /
  Last update: 2018-05-24 16:31    [W:0.056 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site