lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRE: [PATCH] gpio: dwapb: Rework support for 1 interrupt per port A GPIO
    Date
    Hi Simon,

    On 23 May 2018 10:12 Simon Horman wrote:
    > On Wed, May 23, 2018 at 09:52:44AM +0100, Phil Edworthy wrote:
    > > Treat DT and ACPI the same as much as possible. Note that we can't use
    > > platform_get_irq() to get the DT interrupts as they are in the port
    > > sub-node and hence do not have an associated platform device.
    > >
    > > This also fixes a problem introduced with error checking when calling
    > > platform_get_irq().
    >
    > What is the problem? In general I think fixes should be in separate patches.
    The ACPI code would ignore errors returned by platform_get_irq(), instead
    treating the error as an interrupt number.

    Andy Shevchenko provided some late feedback to the v5 patch, but v5 was
    already applied by Linus W. This patch just has the incremental changes that
    were made in v6 of the patch.

    BR
    Phil

    > >
    > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
    > > ---
    > > drivers/gpio/gpio-dwapb.c | 53
    > > ++++++++++++++++++++---------------------------
    > > 1 file changed, 22 insertions(+), 31 deletions(-)
    > >
    > > diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
    > > index 7dcd06b..15b4154 100644
    > > --- a/drivers/gpio/gpio-dwapb.c
    > > +++ b/drivers/gpio/gpio-dwapb.c
    > > @@ -444,7 +444,7 @@ static void dwapb_configure_irqs(struct
    > dwapb_gpio *gpio,
    > > int i;
    > >
    > > for (i = 0; i < pp->ngpio; i++) {
    > > - if (pp->irq[i])
    > > + if (pp->irq[i] >= 0)
    > > irq_set_chained_handler_and_data(pp-
    > >irq[i],
    > > dwapb_irq_handler, gpio);
    > > }
    > > @@ -562,7 +562,7 @@ dwapb_gpio_get_pdata(struct device *dev)
    > > struct dwapb_platform_data *pdata;
    > > struct dwapb_port_property *pp;
    > > int nports;
    > > - int i;
    > > + int i, j;
    > >
    > > nports = device_get_child_node_count(dev);
    > > if (nports == 0)
    > > @@ -580,6 +580,8 @@ dwapb_gpio_get_pdata(struct device *dev)
    > >
    > > i = 0;
    > > device_for_each_child_node(dev, fwnode) {
    > > + struct device_node *np = NULL;
    > > +
    > > pp = &pdata->properties[i++];
    > > pp->fwnode = fwnode;
    > >
    > > @@ -599,46 +601,35 @@ dwapb_gpio_get_pdata(struct device *dev)
    > > pp->ngpio = 32;
    > > }
    > >
    > > + pp->irq_shared = false;
    > > + pp->gpio_base = -1;
    > > +
    > > /*
    > > * Only port A can provide interrupts in all configurations of
    > > * the IP.
    > > */
    > > - if (dev->of_node && pp->idx == 0 &&
    > > - fwnode_property_read_bool(fwnode,
    > > - "interrupt-controller")) {
    > > - struct device_node *np = to_of_node(fwnode);
    > > - unsigned int j;
    > > -
    > > - /*
    > > - * The IP has configuration options to allow a single
    > > - * combined interrupt or one per gpio. If one per
    > gpio,
    > > - * some might not be used.
    > > - */
    > > - for (j = 0; j < pp->ngpio; j++) {
    > > - int irq = of_irq_get(np, j);
    > > - if (irq < 0)
    > > - continue;
    > > -
    > > - pp->irq[j] = irq;
    > > - pp->has_irq = true;
    > > - }
    > > + if (pp->idx != 0)
    > > + continue;
    > >
    > > - if (!pp->has_irq)
    > > - dev_warn(dev, "no irq for port%d\n", pp-
    > >idx);
    > > + if (dev->of_node && fwnode_property_read_bool(fwnode,
    > > + "interrupt-controller")) {
    > > + np = to_of_node(fwnode);
    > > }
    > >
    > > - if (has_acpi_companion(dev) && pp->idx == 0) {
    > > - unsigned int j;
    > > + for (j = 0; j < pp->ngpio; j++) {
    > > + pp->irq[j] = -ENXIO;
    > >
    > > - for (j = 0; j < pp->ngpio; j++) {
    > > + if (np)
    > > + pp->irq[j] = of_irq_get(np, j);
    > > + else if (has_acpi_companion(dev))
    > > pp->irq[j] =
    > platform_get_irq(to_platform_device(dev), j);
    > > - if (pp->irq[j])
    > > - pp->has_irq = true;
    > > - }
    > > +
    > > + if (pp->irq[j] >= 0)
    > > + pp->has_irq = true;
    > > }
    > >
    > > - pp->irq_shared = false;
    > > - pp->gpio_base = -1;
    > > + if (!pp->has_irq)
    > > + dev_warn(dev, "no irq for port%d\n", pp->idx);
    > > }
    > >
    > > return pdata;
    > > --
    > > 2.7.4
    > >

    \
     
     \ /
      Last update: 2018-05-23 11:19    [W:3.425 / U:0.704 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site