lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/5] Documentation: dt-bindings: phy: add phy_config for Rockchip USB Type-C PHY
Date
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- change rockchip,phy_config to rockchip,phy-config and descript it in detail.
Changes in v7:
- None

.../devicetree/bindings/phy/phy-rockchip-typec.txt | 36 +++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
index 960da7f..40d5e7a 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
@@ -17,7 +17,11 @@ Required properties:

Optional properties:
- extcon : extcon specifier for the Power Delivery
-
+ - rockchip,phy-config : A list of voltage swing(mV) and pre-emphasis
+ (dB) pairs. They are 3 blocks of 4 entries and
+ correspond to s0p0 ~ s0p3, s1p0 ~ s1p3,
+ s2p0 ~ s2p3, s3p0 ~ s2p3 swing and pre-emphasis
+ values.
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify dp or usb3 port,
and shall be the following entries:
@@ -50,6 +54,21 @@ Example:
<&cru SRST_P_UPHY0_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";

+ rockchip,phy-config = <0x2a 0x00>,
+ <0x1f 0x15>,
+ <0x14 0x22>,
+ <0x02 0x2b>,
+
+ <0x21 0x00>,
+ <0x12 0x15>,
+ <0x02 0x22>,
+ <0 0>,
+
+ <0x15 0x00>,
+ <0x00 0x15>,
+ <0 0>,
+ <0 0>;
+
tcphy0_dp: dp-port {
#phy-cells = <0>;
};
@@ -74,6 +93,21 @@ Example:
<&cru SRST_P_UPHY1_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";

+ rockchip,phy-config = <0x2a 0x00>,
+ <0x1f 0x15>,
+ <0x14 0x22>,
+ <0x02 0x2b>,
+
+ <0x21 0x00>,
+ <0x12 0x15>,
+ <0x02 0x22>,
+ <0 0>,
+
+ <0x15 0x00>,
+ <0x00 0x15>,
+ <0 0>,
+ <0 0>;
+
tcphy1_dp: dp-port {
#phy-cells = <0>;
};
--
2.7.4
\
 
 \ /
  Last update: 2018-05-23 09:43    [W:0.118 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site