lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables
Date
On Monday, May 21, 2018 7:35:19 PM CEST Tony Lindgren wrote:
> Hi,
>
> * Janusz Krzysztofik <jmkrzyszt@gmail.com> [180518 14:12]:
> > Scope of the change is limited to GPIO pins used by board specific
> > device drivers which will be updated by follow-up patches of the
> > series. Those are some OMAP GPIO (gpio-0-15) and most of Amstrad Delta
> > latch2 GPIO bank pins. Remaining pins of those banks, as well as
> > Amstrad Delta latch1 pins, will be addressed later.
> >
> > Assign a label ("latch2") to the bank, enumerate its pins and put that
> > information, together with OMAP GPIO bank pins, in GPIO lookup tables.
> > Assign lookup tables to devices as soon as those devices are registered
> > and their names can be obtained.
> >
> > A step froward in:
> > - removal of hard-coded GPIO numbers from drivers,
> > - removal of board mach includes from drivers,
> > - switching to dynamically assigned GPIO numbers.
>
> Is this first patch safe for me to apply separately?

Absolutely, it is.

Thanks,
Janusz



\
 
 \ /
  Last update: 2018-05-21 20:11    [W:0.390 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site