lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 4/5] remoteproc: qcom: Add support for mss remoteproc on SDM845
From
Date
Hi Bjorn,
Thanks for the review.

On 05/19/2018 03:01 AM, Bjorn Andersson wrote:
> On Wed 25 Apr 08:08 PDT 2018, Sibi Sankar wrote:
>
>> From SDM845, the Q6SS reset sequence on software side has been
>> simplified with the introduction of boot FSM which assists in
>> bringing the Q6 out of reset
>>
>> Add GLINK subdevice to allow definition of GLINK edge as a
>> child of modem-pil
>>
>
> Please split this in two patches; one adding sdm845 and one adding the
> glink subdev. You can squash in the addition of the compatible in the dt
> binding into the sdm845 code patch, you wish as well.
>

Will split it into two commits
Will still keep the dt-binding as a separate patch

> Apart from that this looks good!
>
> Regards,
> Bjorn
>
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>> drivers/remoteproc/qcom_q6v5_pil.c | 65 +++++++++++++++++++++++++++++-
>> 1 file changed, 64 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
>> index 7e2d04d4f2f0..4d9504e8bf8e 100644
>> --- a/drivers/remoteproc/qcom_q6v5_pil.c
>> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
>> @@ -57,6 +57,8 @@
>> #define RMB_PMI_META_DATA_REG 0x10
>> #define RMB_PMI_CODE_START_REG 0x14
>> #define RMB_PMI_CODE_LENGTH_REG 0x18
>> +#define RMB_MBA_MSS_STATUS 0x40
>> +#define RMB_MBA_ALT_RESET 0x44
>>
>> #define RMB_CMD_META_DATA_READY 0x1
>> #define RMB_CMD_LOAD_READY 0x2
>> @@ -104,6 +106,13 @@
>> #define QDSP6SS_XO_CBCR 0x0038
>> #define QDSP6SS_ACC_OVERRIDE_VAL 0x20
>>
>> +/* QDSP6v65 parameters */
>> +#define QDSP6SS_SLEEP 0x3C
>> +#define QDSP6SS_BOOT_CORE_START 0x400
>> +#define QDSP6SS_BOOT_CMD 0x404
>> +#define SLEEP_CHECK_MAX_LOOPS 200
>> +#define BOOT_FSM_TIMEOUT 10000
>> +
>> struct reg_info {
>> struct regulator *reg;
>> int uV;
>> @@ -170,6 +179,7 @@ struct q6v5 {
>> void *mpss_region;
>> size_t mpss_size;
>>
>> + struct qcom_rproc_glink glink_subdev;
>> struct qcom_rproc_subdev smd_subdev;
>> struct qcom_rproc_ssr ssr_subdev;
>> struct qcom_sysmon *sysmon;
>> @@ -184,6 +194,7 @@ enum {
>> MSS_MSM8916,
>> MSS_MSM8974,
>> MSS_MSM8996,
>> + MSS_SDM845,
>> };
>>
>> static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
>> @@ -390,8 +401,35 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>> int ret;
>> int i;
>>
>> + if (qproc->version == MSS_SDM845) {
>>
>> - if (qproc->version == MSS_MSM8996) {
>> + val = readl(qproc->reg_base + QDSP6SS_SLEEP);
>> + val |= 0x1;
>> + writel(val, qproc->reg_base + QDSP6SS_SLEEP);
>> +
>> + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP,
>> + val, !(val & BIT(31)), 1,
>> + SLEEP_CHECK_MAX_LOOPS);
>> + if (ret) {
>> + dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + /* De-assert QDSP6 stop core */
>> + writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START);
>> + /* Trigger boot FSM */
>> + writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD);
>> +
>> + ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS,
>> + val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
>> + if (ret) {
>> + dev_err(qproc->dev, "Boot FSM failed to complete.\n");
>> + return ret;
>> + }
>> +
>> + goto pbl_wait;
>> +
>> + } else if (qproc->version == MSS_MSM8996) {
>> /* Override the ACC value if required */
>> writel(QDSP6SS_ACC_OVERRIDE_VAL,
>> qproc->reg_base + QDSP6SS_STRAP_ACC);
>> @@ -499,6 +537,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>> val &= ~Q6SS_STOP_CORE;
>> writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
>>
>> +pbl_wait:
>> /* Wait for PBL status */
>> ret = q6v5_rmb_pbl_wait(qproc, 1000);
>> if (ret == -ETIMEDOUT) {
>> @@ -1256,6 +1295,7 @@ static int q6v5_probe(struct platform_device *pdev)
>> }
>> qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
>> qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
>> + qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
>> qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
>> qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
>> qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
>> @@ -1279,6 +1319,7 @@ static int q6v5_remove(struct platform_device *pdev)
>> rproc_del(qproc->rproc);
>>
>> qcom_remove_sysmon_subdev(qproc->sysmon);
>> + qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
>> qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
>> qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
>> rproc_free(qproc->rproc);
>> @@ -1286,6 +1327,27 @@ static int q6v5_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static const struct rproc_hexagon_res sdm845_mss = {
>> + .hexagon_mba_image = "mba.mbn",
>> + .proxy_clk_names = (char*[]){
>> + "xo",
>> + "axis2",
>> + "prng",
>> + NULL
>> + },
>> + .active_clk_names = (char*[]){
>> + "iface",
>> + "bus",
>> + "mem",
>> + "gpll0_mss",
>> + "snoc_axi",
>> + "mnoc_axi",
>> + NULL
>> + },
>> + .need_mem_protection = true,
>> + .version = MSS_SDM845,
>> +};
>> +
>> static const struct rproc_hexagon_res msm8996_mss = {
>> .hexagon_mba_image = "mba.mbn",
>> .proxy_clk_names = (char*[]){
>> @@ -1379,6 +1441,7 @@ static const struct of_device_id q6v5_of_match[] = {
>> { .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
>> { .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
>> { .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
>> + { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
>> { },
>> };
>> MODULE_DEVICE_TABLE(of, q6v5_of_match);
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>
>

--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-05-21 18:52    [W:0.043 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site