lkml.org 
[lkml]   [2018]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory
On Wed, 16 May 2018 13:52:39 -0400
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> This patch removes the IIO counter subdirectory which is now superceded
> by the Counter subsystem. Deprecation warnings are added to the
> documentation of the relevant IIO counter sysfs attributes.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>

Please drop the directory when it becomes empty rather than in a later
patch. IIRC there are some issues with empty Makefiles that will
make building inbetween tricky.

For the deprecated markings.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
> Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++
> .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++
> drivers/iio/Kconfig | 1 -
> drivers/iio/Makefile | 1 -
> drivers/iio/counter/Kconfig | 8 --------
> drivers/iio/counter/Makefile | 5 -----
> 6 files changed, 24 insertions(+), 15 deletions(-)
> delete mode 100644 drivers/iio/counter/Kconfig
> delete mode 100644 drivers/iio/counter/Makefile
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 731146c3b138..6115d97b075e 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -1637,6 +1637,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Raw counter device counts from channel Y. For quadrature
> counters, multiplication by an available [Y]_scale results in
> the counts of a single quadrature signal phase from channel Y.
> @@ -1645,6 +1647,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Raw counter device index value from channel Y. This attribute
> provides an absolute positional reference (e.g. a pulse once per
> revolution) which may be used to home positional systems as
> @@ -1654,6 +1658,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
> KernelVersion: 4.12
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> A list of possible counting directions which are:
> - "up" : counter device is increasing.
> - "down": counter device is decreasing.
> @@ -1662,4 +1668,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
> KernelVersion: 4.12
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Raw counter device counters direction for channel Y.
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
> index 7fac2c268d9a..bac3d0d48b7b 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
> @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Discrete set of available values for the respective counter
> configuration are listed in this file.
>
> @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Count mode for channel Y. Four count modes are available:
> normal, range limit, non-recycle, and modulo-n. The preset value
> for channel Y is used by the count mode where required.
> @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Read-only attribute that indicates whether excessive noise is
> present at the channel Y count inputs in quadrature clock mode;
> irrelevant in non-quadrature clock mode.
> @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> If the counter device supports preset registers, the preset
> count for channel Y is provided by this attribute.
>
> @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Configure channel Y counter for non-quadrature or quadrature
> clock mode. Selecting non-quadrature clock mode will disable
> synchronous load mode. In quadrature clock mode, the channel Y
> @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Whether to set channel Y counter with channel Y preset value
> when channel Y index input is active, or continuously count.
> Valid attribute values are boolean.
> @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Active level of channel Y index input; irrelevant in
> non-synchronous load mode.
>
> @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
> KernelVersion: 4.10
> Contact: linux-iio@vger.kernel.org
> Description:
> + This interface is deprecated; please use the Counter subsystem.
> +
> Configure channel Y counter for non-synchronous or synchronous
> load mode. Synchronous load mode cannot be selected in
> non-quadrature clock mode.
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index d69e85a8bdc3..1152efad91a1 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -74,7 +74,6 @@ source "drivers/iio/afe/Kconfig"
> source "drivers/iio/amplifiers/Kconfig"
> source "drivers/iio/chemical/Kconfig"
> source "drivers/iio/common/Kconfig"
> -source "drivers/iio/counter/Kconfig"
> source "drivers/iio/dac/Kconfig"
> source "drivers/iio/dummy/Kconfig"
> source "drivers/iio/frequency/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index d8cba9c229c0..7bdd31f1b88f 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -20,7 +20,6 @@ obj-y += amplifiers/
> obj-y += buffer/
> obj-y += chemical/
> obj-y += common/
> -obj-y += counter/
> obj-y += dac/
> obj-y += dummy/
> obj-y += gyro/
> diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
> deleted file mode 100644
> index 95a7a0df6cac..000000000000
> --- a/drivers/iio/counter/Kconfig
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -#
> -# Counter devices
> -#
> -# When adding new entries keep the list in alphabetical order
> -
> -menu "Counters"
> -
> -endmenu
> diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile
> deleted file mode 100644
> index 8fd3d954775a..000000000000
> --- a/drivers/iio/counter/Makefile
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -#
> -# Makefile for IIO counter devices
> -#
> -
> -# When adding new entries keep the list in alphabetical order

\
 
 \ /
  Last update: 2018-05-20 17:53    [W:0.173 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site