lkml.org 
[lkml]   [2018]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/4] platform: x86: intel_cht_int33fe: Fix dependencies
On Tue, May 01, 2018 at 11:53:24AM +0200, Hans de Goede wrote:
> Hi,
>
> On 30-04-18 14:41, Heikki Krogerus wrote:
> > The driver will not probe unless bq24190 is loaded, so
> > making it a dependency.
>
> Hmm, the dependency is pure run-time, with this Kconfig
> change if a user now decides to builtin the intel_cht_int33fe
> driver, the bq24190 driver must also be builtin, I'm not sure
> if that is a good thing.

OK. That should be possible to sort out with something like this:

depends on CHARGER_BQ24190=y || CHARGER_BQ24190=INTEL_CHT_INT33FE

I'll fix this one.

> > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > Cc: Wolfram Sang <wsa@the-dreams.de>
> > Cc: Darren Hart <dvhart@infradead.org>
> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> > drivers/i2c/busses/Kconfig | 3 +--
> > drivers/platform/x86/Kconfig | 4 ++--
> > 2 files changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index 8d21b9825d71..fce9f2ca0570 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -202,8 +202,7 @@ config I2C_CHT_WC
> > Note this controller is hooked up to a TI bq24292i charger-IC,
> > combined with a FUSB302 Type-C port-controller as such it is advised
> > - to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
> > - (the fusb302 driver currently is in drivers/staging).
> > + to also select CONFIG_TYPEC_FUSB302=m.
> > config I2C_NFORCE2
> > tristate "Nvidia nForce2, nForce3 and nForce4"
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 39d06dd1f63a..1dbd9d547e60 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -866,6 +866,7 @@ config ACPI_CMPC
> > config INTEL_CHT_INT33FE
> > tristate "Intel Cherry Trail ACPI INT33FE Driver"
> > depends on X86 && ACPI && I2C && REGULATOR
> > + depends on CHARGER_BQ24190
> > ---help---
> > This driver add support for the INT33FE ACPI device found on
> > some Intel Cherry Trail devices.
> > @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
> > i2c drivers for these chips can bind to the them.
> > If you enable this driver it is advised to also select
> > - CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
> > - CONFIG_BATTERY_MAX17042=m.
> > + CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
> > config INTEL_INT0002_VGPIO
> > tristate "Intel ACPI INT0002 Virtual GPIO driver"
> >

Thanks,

--
heikki

\
 
 \ /
  Last update: 2018-05-02 09:00    [W:0.054 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site