lkml.org 
[lkml]   [2018]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: k2g-evm: Add DCAN dt nodes
Date
The keystone 2 galileo evm has support for dcan.
Add nodes and pinmuxes for dcan0 and dcan1.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 6a4657799b99..154fdd7a7022 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -114,6 +114,20 @@
K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */
>;
};
+
+ dcan0_pins: pinmux_dcan0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dcan0tx.dcan0tx */
+ K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* dcan0rx.dcan0rx */
+ >;
+ };
+
+ dcan1_pins: pinmux_dcan1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE1) /* qspicsn2.dcan1tx */
+ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */
+ >;
+ };
};

&uart0 {
@@ -268,3 +282,15 @@
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
+
+&dcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_pins>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
--
2.17.0
\
 
 \ /
  Last update: 2018-05-02 13:59    [W:0.023 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site