lkml.org 
[lkml]   [2018]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] Re: [PATCH 02/21] arm64: dts: allwinner: a64: Add DE2 CCU
On Wed, May 2, 2018 at 5:04 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
>
>
> 于 2018年5月2日 GMT+08:00 下午7:32:50, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
>>On Mon, Apr 30, 2018 at 05:10:39PM +0530, Jagan Teki wrote:
>>> DE2 in A64 has clock control unit and behavior is
>>> same like H3/H5, so reuse the same in A64.
>>>
>>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>>> ---
>>> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 15 +++++++++++++++
>>> 1 file changed, 15 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>> index 1b2ef28c42bd..67b80bbe5bf5 100644
>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>> @@ -43,9 +43,11 @@
>>> */
>>>
>>> #include <dt-bindings/clock/sun50i-a64-ccu.h>
>>> +#include <dt-bindings/clock/sun8i-de2.h>
>>> #include <dt-bindings/clock/sun8i-r-ccu.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/reset/sun50i-a64-ccu.h>
>>> +#include <dt-bindings/reset/sun8i-de2.h>
>>>
>>> / {
>>> interrupt-parent = <&gic>;
>>> @@ -168,6 +170,19 @@
>>> #size-cells = <1>;
>>> ranges;
>>>
>>> + display_clocks: clock@1000000 {
>>> + compatible = "allwinner,sun50i-a64-de2-clk",
>>> + "allwinner,sun50i-h5-de2-clk";
>>
>>The A64 was released before the H5, so that should be the other way
>>around.
>>
>>> + reg = <0x01000000 0x100000>;
>>> + clocks = <&ccu CLK_DE>,
>>> + <&ccu CLK_BUS_DE>;
>>> + clock-names = "mod",
>>> + "bus";
>>> + resets = <&ccu RST_BUS_DE>;
>>> + #clock-cells = <1>;
>>> + #reset-cells = <1>;
>>> + };
>>> +
>>
>>So it turns out we don't need the SRAM to access the CCU driver?
>
> As now U-Boot claims SRAM, people may forget thus :-(

I've sent few mails about how we represent de2 with sram_c [1] but
none response after. Can I get further inputs so-that we can include
sram_c in proper manner.

[1] https://patchwork.kernel.org/patch/10289737/

Jagan.

\
 
 \ /
  Last update: 2018-05-02 13:51    [W:0.098 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site