lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] rtc: ls1x: add range
Date
While the year in encoded on 32 bits in SYS_TOYWRITE1i/SYS_TOYREAD1. The
Loongson 1c datasheet states that the range is from 0 to 99.

The current code exceeds this range and seems to be working, I deduce that
the leap year algorithm will fail in 2100.

Anyway, alarm registers only encode the year on 14 bits so with alarm
support, the range will always be limited to 0 to 16383.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-ls1x.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-ls1x.c b/drivers/rtc/rtc-ls1x.c
index 8aa3f223621c..f4c248655edd 100644
--- a/drivers/rtc/rtc-ls1x.c
+++ b/drivers/rtc/rtc-ls1x.c
@@ -177,6 +177,8 @@ static int ls1x_rtc_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, rtcdev);
rtcdev->ops = &ls1x_rtc_ops;
+ rtcdev->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtcdev->range_max = RTC_TIMESTAMP_END_2099;

return rtc_register_device(rtcdev);
}
--
2.17.0
\
 
 \ /
  Last update: 2018-05-17 22:54    [W:0.040 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site