lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: pfuze100: add enable/disable for switch" to the regulator tree
Date
The patch

regulator: pfuze100: add enable/disable for switch

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 5fe156f1cab4f340ddb6283c993912be77594016 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Thu, 17 May 2018 15:27:21 +0800
Subject: [PATCH] regulator: pfuze100: add enable/disable for switch

Add enable/disable support for switch regulator on pfuze100.

Based on Robin Gong's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/pfuze100-regulator.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 680f076e3d85..053eb1ecf18d 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -155,6 +155,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
};

static const struct regulator_ops pfuze100_sw_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -200,6 +203,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x3f, \
+ .enable_reg = (base) + PFUZE100_MODE_OFFSET, \
+ .enable_val = 0xc, \
+ .disable_val = 0x0, \
+ .enable_mask = 0xf, \
+ .enable_time = 500, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x3f, \
--
2.17.0
\
 
 \ /
  Last update: 2018-05-17 19:14    [W:0.027 / U:2.056 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site