lkml.org 
[lkml]   [2018]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver
On Tue, May 15, 2018 at 12:13 PM, Ilia Lin <ilialin@codeaurora.org> wrote:
> The driver provides kernel level API for other drivers
> to access the MSM8996 L2 cache registers.
> Separating the L2 access code from the PMU driver and
> making it public to allow other drivers use it.
> The accesses must be separated with a single spinlock,
> maintained in this driver.
>
> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
> ---
> drivers/perf/Kconfig | 1 +
> drivers/perf/qcom_l2_pmu.c | 90 ++++++++++--------------------------
> drivers/soc/qcom/Kconfig | 3 ++
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/kryo-l2-accessors.c | 65 ++++++++++++++++++++++++++
> include/soc/qcom/kryo-l2-accessors.h | 21 +++++++++
> 6 files changed, 115 insertions(+), 66 deletions(-)
> create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c
> create mode 100644 include/soc/qcom/kryo-l2-accessors.h
>
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 28bb5a0..561252a 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -69,6 +69,7 @@ config HISI_PMU
> config QCOM_L2_PMU
> bool "Qualcomm Technologies L2-cache PMU"
> depends on ARCH_QCOM && ARM64 && ACPI
> + select QCOM_KRYO_L2_ACCESSORS
> help
> Provides support for the L2 cache performance monitor unit (PMU)
> in Qualcomm Technologies processors.
> diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
> index 842135c..cc31f51 100644
> --- a/drivers/perf/qcom_l2_pmu.c
> +++ b/drivers/perf/qcom_l2_pmu.c
> @@ -31,6 +31,7 @@
> #include <asm/barrier.h>
> #include <asm/local64.h>
> #include <asm/sysreg.h>
> +#include <soc/qcom/kryo-l2-accessors.h>
>
> #define MAX_L2_CTRS 9
>
> @@ -87,8 +88,6 @@
> #define L2_COUNTER_RELOAD BIT_ULL(31)
> #define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63)
>
> -#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
> -#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
>
> #define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE)
>
> @@ -107,48 +106,7 @@
> #define L2_EVENT_STREX 0x421
> #define L2_EVENT_CLREX 0x422
>
> -static DEFINE_RAW_SPINLOCK(l2_access_lock);
>
> -/**
> - * set_l2_indirect_reg: write value to an L2 register
> - * @reg: Address of L2 register.
> - * @value: Value to be written to register.
> - *
> - * Use architecturally required barriers for ordering between system register
> - * accesses
> - */
> -static void set_l2_indirect_reg(u64 reg, u64 val)
> -{
> - unsigned long flags;
> -
> - raw_spin_lock_irqsave(&l2_access_lock, flags);
> - write_sysreg_s(reg, L2CPUSRSELR_EL1);
> - isb();
> - write_sysreg_s(val, L2CPUSRDR_EL1);
> - isb();
> - raw_spin_unlock_irqrestore(&l2_access_lock, flags);
> -}
> -
> -/**
> - * get_l2_indirect_reg: read an L2 register value
> - * @reg: Address of L2 register.
> - *
> - * Use architecturally required barriers for ordering between system register
> - * accesses
> - */
> -static u64 get_l2_indirect_reg(u64 reg)
> -{
> - u64 val;
> - unsigned long flags;
> -
> - raw_spin_lock_irqsave(&l2_access_lock, flags);
> - write_sysreg_s(reg, L2CPUSRSELR_EL1);
> - isb();
> - val = read_sysreg_s(L2CPUSRDR_EL1);
> - raw_spin_unlock_irqrestore(&l2_access_lock, flags);
> -
> - return val;
> -}
>
> struct cluster_pmu;
>
> @@ -219,28 +177,28 @@ static inline struct cluster_pmu *get_cluster_pmu(
> static void cluster_pmu_reset(void)
> {
> /* Reset all counters */
> - set_l2_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
> - set_l2_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
> - set_l2_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
> - set_l2_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
> + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
> + kryo_l2_set_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
> + kryo_l2_set_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
> + kryo_l2_set_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
> }
>
> static inline void cluster_pmu_enable(void)
> {
> - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
> + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
> }
>
> static inline void cluster_pmu_disable(void)
> {
> - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
> + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
> }
>
> static inline void cluster_pmu_counter_set_value(u32 idx, u64 value)
> {
> if (idx == l2_cycle_ctr_idx)
> - set_l2_indirect_reg(L2PMCCNTR, value);
> + kryo_l2_set_indirect_reg(L2PMCCNTR, value);
> else
> - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
> + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
> }
>
> static inline u64 cluster_pmu_counter_get_value(u32 idx)
> @@ -248,46 +206,46 @@ static inline u64 cluster_pmu_counter_get_value(u32 idx)
> u64 value;
>
> if (idx == l2_cycle_ctr_idx)
> - value = get_l2_indirect_reg(L2PMCCNTR);
> + value = kryo_l2_get_indirect_reg(L2PMCCNTR);
> else
> - value = get_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
> + value = kryo_l2_get_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
>
> return value;
> }
>
> static inline void cluster_pmu_counter_enable(u32 idx)
> {
> - set_l2_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
> + kryo_l2_set_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
> }
>
> static inline void cluster_pmu_counter_disable(u32 idx)
> {
> - set_l2_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
> + kryo_l2_set_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
> }
>
> static inline void cluster_pmu_counter_enable_interrupt(u32 idx)
> {
> - set_l2_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
> + kryo_l2_set_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
> }
>
> static inline void cluster_pmu_counter_disable_interrupt(u32 idx)
> {
> - set_l2_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
> + kryo_l2_set_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
> }
>
> static inline void cluster_pmu_set_evccntcr(u32 val)
> {
> - set_l2_indirect_reg(L2PMCCNTCR, val);
> + kryo_l2_set_indirect_reg(L2PMCCNTCR, val);
> }
>
> static inline void cluster_pmu_set_evcntcr(u32 ctr, u32 val)
> {
> - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
> + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
> }
>
> static inline void cluster_pmu_set_evtyper(u32 ctr, u32 val)
> {
> - set_l2_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
> + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
> }
>
> static void cluster_pmu_set_resr(struct cluster_pmu *cluster,
> @@ -303,11 +261,11 @@ static void cluster_pmu_set_resr(struct cluster_pmu *cluster,
>
> spin_lock_irqsave(&cluster->pmu_lock, flags);
>
> - resr_val = get_l2_indirect_reg(L2PMRESR);
> + resr_val = kryo_l2_get_indirect_reg(L2PMRESR);
> resr_val &= ~(L2PMRESR_GROUP_MASK << shift);
> resr_val |= field;
> resr_val |= L2PMRESR_EN;
> - set_l2_indirect_reg(L2PMRESR, resr_val);
> + kryo_l2_set_indirect_reg(L2PMRESR, resr_val);
>
> spin_unlock_irqrestore(&cluster->pmu_lock, flags);
> }
> @@ -323,14 +281,14 @@ static inline void cluster_pmu_set_evfilter_sys_mode(u32 ctr)
> L2PMXEVFILTER_ORGFILTER_IDINDEP |
> L2PMXEVFILTER_ORGFILTER_ALL;
>
> - set_l2_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
> + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
> }
>
> static inline u32 cluster_pmu_getreset_ovsr(void)
> {
> - u32 result = get_l2_indirect_reg(L2PMOVSSET);
> + u32 result = kryo_l2_get_indirect_reg(L2PMOVSSET);
>
> - set_l2_indirect_reg(L2PMOVSCLR, result);
> + kryo_l2_set_indirect_reg(L2PMOVSCLR, result);
> return result;
> }
>
> @@ -783,7 +741,7 @@ static int get_num_counters(void)
> {
> int val;
>
> - val = get_l2_indirect_reg(L2PMCR);
> + val = kryo_l2_get_indirect_reg(L2PMCR);
>
> /*
> * Read number of counters from L2PMCR and add 1
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 7093fe7..0567dff 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -39,6 +39,9 @@ config QCOM_GSBI
> functions for connecting the underlying serial UART, SPI, and I2C
> devices to the output pins.
>
> +config QCOM_KRYO_L2_ACCESSORS
> + bool
> +
> config QCOM_MDT_LOADER
> tristate
> select QCOM_SCM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index cbf414c..e4d3f5a 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
> diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c
> new file mode 100644
> index 0000000..d35a860
> --- /dev/null
> +++ b/drivers/soc/qcom/kryo-l2-accessors.c
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +

Get rid of the GPL boilerplate i.e. everything after the Copyright
line. You only need the SPDX line at the top.

> +#include <linux/spinlock.h>
> +#include <asm/sysreg.h>
> +#include <soc/qcom/kryo-l2-accessors.h>
> +
> +#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
> +#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
> +
> +static DEFINE_RAW_SPINLOCK(l2_access_lock);
> +
> +/**
> + * kryo_l2_set_indirect_reg() - write value to an L2 register
> + * @reg: Address of L2 register.
> + * @value: Value to be written to register.
> + *
> + * Use architecturally required barriers for ordering between system register
> + * accesses, and system registers with respect to device memory
> + */
> +void kryo_l2_set_indirect_reg(u64 reg, u64 val)
> +{
> + unsigned long flags;
> +
> + raw_spin_lock_irqsave(&l2_access_lock, flags);
> + write_sysreg_s(reg, L2CPUSRSELR_EL1);
> + isb();
> + write_sysreg_s(val, L2CPUSRDR_EL1);
> + isb();
> + raw_spin_unlock_irqrestore(&l2_access_lock, flags);
> +}
> +EXPORT_SYMBOL(kryo_l2_set_indirect_reg);
> +
> +/**
> + * kryo_l2_get_indirect_reg() - read an L2 register value
> + * @reg: Address of L2 register.
> + *
> + * Use architecturally required barriers for ordering between system register
> + * accesses, and system registers with respect to device memory
> + */
> +u64 kryo_l2_get_indirect_reg(u64 reg)
> +{
> + u64 val;
> + unsigned long flags;
> +
> + raw_spin_lock_irqsave(&l2_access_lock, flags);
> + write_sysreg_s(reg, L2CPUSRSELR_EL1);
> + isb();
> + val = read_sysreg_s(L2CPUSRDR_EL1);
> + raw_spin_unlock_irqrestore(&l2_access_lock, flags);
> +
> + return val;
> +}
> +EXPORT_SYMBOL(kryo_l2_get_indirect_reg);
> diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h
> new file mode 100644
> index 0000000..0840e87
> --- /dev/null
> +++ b/include/soc/qcom/kryo-l2-accessors.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */

Get rid of the GPL boilerplate i.e. everything after the Copyright
line. You only need the SPDX line at the top.

> +#ifndef __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
> +#define __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
> +
> +void kryo_l2_set_indirect_reg(u64 reg, u64 val);
> +u64 kryo_l2_get_indirect_reg(u64 reg);
> +
> +#endif
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2018-05-16 15:12    [W:0.069 / U:28.256 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site