lkml.org 
[lkml]   [2018]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
On Wed, May 16, 2018 at 12:20 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>>> a sticker denoting the model name S070WV20-CT16.
>>>>
>>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>>> However the panel only does 262k colors.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>> .../display/panel/bananapi,s070wv20-ct16.txt | 7 ++++++
>>>> drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++
>>>> 2 files changed, 32 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> new file mode 100644
>>>> index 000000000000..2ec35ce36e9a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> @@ -0,0 +1,7 @@
>>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>>> +
>>>> +Required properties:
>>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>>> +
>>>> +This binding is compatible with the simple-panel binding, which is specified
>>>> +in simple-panel.txt in this directory.
>>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>> },
>>>> };
>>>>
>>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>>> + .clock = 30000,
>>>> + .hdisplay = 800,
>>>> + .hsync_start = 800 + 40,
>>>> + .hsync_end = 800 + 40 + 48,
>>>> + .htotal = 800 + 40 + 48 + 40,
>>>> + .vdisplay = 480,
>>>> + .vsync_start = 480 + 13,
>>>> + .vsync_end = 480 + 13 + 3,
>>>> + .vtotal = 480 + 13 + 3 + 29,
>>>> +};
>>>> +
>>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>>> + .modes = &bananapi_s070wv20_ct16_mode,
>>>> + .num_modes = 1,
>>>> + .bpc = 6,
>>>> + .size = {
>>>> + .width = 154,
>>>> + .height = 86,
>>>> + },
>>>> +};
>>>
>>> I think this parallel RGB interface right? I too have same display
>>> with DSI I'm sure these setting will not useful right? do we need to
>>> write separate panel driver for that?
>>
>> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
>> connector board. The model I have is dual interface.
>
> Yes, this is what I have [1] where same strip can use for both RGB and
> MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

In theory yes. You can use RGB with Banana Pi M1+ and DSI with Banana Pi M3.
However, DSI on A83T is not supported yet, and I don't intend to spend my
time writing a driver for the MIPI DSI bridge on that panel. The bridge IC
is the one on top of the DSI FPC connector.

ChenYu

> [1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html
>
> Jagan.

\
 
 \ /
  Last update: 2018-05-16 09:57    [W:0.293 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site