lkml.org 
[lkml]   [2018]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
On Tue, May 15, 2018 at 04:50:44PM +0200, Geert Uytterhoeven wrote:
> Hi Gilad,
>
> On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad@benyossef.com> wrote:
> > Add bindings for CryptoCell instance in the SoC.
> >
> > Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > @@ -528,6 +528,14 @@
> > status = "disabled";
> > };
> >
> > + arm_cc630p: crypto@e6601000 {
> > + compatible = "arm,cryptocell-630p-ree";
> > + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > + #interrupt-cells = <2>;
>
> I believe the #interrupt-cells property is not needed.
>
> > + reg = <0x0 0xe6601000 0 0x1000>;
> > + clocks = <&cpg CPG_MOD 229>;
> > + };
>
> The rest looks good, but I cannot verify the register block.
>
> > +
> > i2c3: i2c@e66d0000 {
> > #address-cells = <1>;
> > #size-cells = <0>;

Thanks, I have applied this after dropping the #interrupt-cells property.

\
 
 \ /
  Last update: 2018-05-16 09:44    [W:0.391 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site