lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Are media drivers abusing of GFP_DMA? - was: Re: [LSF/MM TOPIC NOTES] x86 ZONE_DMA love
Hi Laurent,

Em Tue, 15 May 2018 11:27:44 +0300
Laurent Pinchart <laurent.pinchart@ideasonboard.com> escreveu:

> Hello,
>
> On Tuesday, 15 May 2018 10:30:28 EEST Fabien DESSENNE wrote:
> > On 14/05/18 12:39, Mauro Carvalho Chehab wrote:
> > > Em Mon, 14 May 2018 07:35:03 -0300 Mauro Carvalho Chehab escreveu:
> > >> Em Mon, 14 May 2018 08:00:37 +0000 Fabien DESSENNE escreveu:
> > >>> On 07/05/18 17:19, Mauro Carvalho Chehab wrote:
> > >>>> Em Mon, 07 May 2018 16:26:08 +0300 Laurent Pinchart escreveu:
> > >>>>> On Saturday, 5 May 2018 19:08:15 EEST Mauro Carvalho Chehab wrote:
> > >>>>>
> > >>>>>> There was a recent discussion about the use/abuse of GFP_DMA flag
> > >>>>>> when allocating memories at LSF/MM 2018 (see Luis notes enclosed).
> > >>>>>>
> > >>>>>> The idea seems to be to remove it, using CMA instead. Before doing
> > >>>>>> that, better to check if what we have on media is are valid use cases
> > >>>>>> for it, or if it is there just due to some misunderstanding (or
> > >>>>>> because it was copied from some other code).
> > >>>>>>
> > >>>>>> Hans de Goede sent us today a patch stopping abuse at gspca, and I'm
> > >>>>>> also posting today two other patches meant to stop abuse of it on
> > >>>>>> USB drivers. Still, there are 4 platform drivers using it:
> > >>>>>>
> > >>>>>> $ git grep -l -E "GFP_DMA\\b" drivers/media/
> > >>>>>> drivers/media/platform/omap3isp/ispstat.c
> > >>>>>> drivers/media/platform/sti/bdisp/bdisp-hw.c
> > >>>>>> drivers/media/platform/sti/hva/hva-mem.c
> > >>>
> > >>> The two STI drivers (bdisp-hw.c and hva-mem.c) are only expected to run
> > >>> on ARM platforms, not on x86. Since this thread deals with x86 & DMA
> > >>> trouble, I am not sure that we actually have a problem for the sti
> > >>> drivers.
> > >>>
> > >>> There are some other sti drivers that make use of this GFP_DMA flag
> > >>> (drivers/gpu/drm/sti/sti_*.c) and it does not seem to be a problem.
> > >>>
> > >>> Nevertheless I can see that the media sti drivers depend on COMPILE_TEST
> > >>> (which is not the case for the DRM ones).
> > >>> Would it be an acceptable solution to remove the COMPILE_TEST
> > >>> dependency?
> > >>
> > >> This has nothing to do with either x86 or COMPILE_TEST. The thing is
> > >> that there's a plan for removing GFP_DMA from the Kernel[1], as it was
> > >> originally meant to be used only by old PCs, where the DMA controllers
> > >> used only on the bottom 16 MB memory address (24 bits). IMHO, it is
> > >> very unlikely that any ARM SoC have such limitation.
> > >>
> > >> [1] https://lwn.net/Articles/753273/ (article will be freely available
> > >> on May, 17)
> > >
> > > Btw, you can also read about that at:
> > >
> > > https://lwn.net/Articles/753274/
> > >
> > >> Anyway, before the removal of GFP_DMA happens, I'd like to better
> > >> understand why we're using it at media, and if we can, instead,
> > >> set the DMA bit mask, just like almost all other media drivers
> > >> that require to confine DMA into a certain range do. In the case
> > >> of ARM, this is what we currently have:
> > >>
> > >> drivers/media/platform/exynos-gsc/gsc-core.c:
> > >> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/exynos4-is/fimc-core.c:
> > >> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/exynos4-is/fimc-is.c:
> > >> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/exynos4-is/fimc-lite.c:
> > >> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/mtk-mdp/mtk_mdp_core.c:
> > >> vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/omap3isp/isp.c: ret =
> > >> dma_coerce_mask_and_coherent(isp->dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/s5p-g2d/g2d.c:
> > >> vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/s5p-jpeg/jpeg-core.c:
> > >> vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
> > >> drivers/media/platform/s5p-mfc/s5p_mfc.c:
> > >> DMA_BIT_MASK(32));
> > >> drivers/media/platform/s5p-mfc/s5p_mfc.c:
> > >> DMA_BIT_MASK(32));
> > >> drivers/media/platform/s5p-mfc/s5p_mfc.c:
> > >> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> >
> > That's clearer now, thank you for the clarification
> > I am about to send patches for the sti drivers (set the DMA bit mask)
>
> Some drivers call vb2_dma_contig_set_max_seg_size() and some call
> dma_coerce_mask_and_coherent(). Both are likely needed, the former telling the
> DMA mapping API about the maximum size of a scatter-gather chunk that the
> device supports (when using vb2-dma-contig that size should really be the full
> address space supported by the device as we want DMA-contiguous buffers), and
> the latter telling the DMA mapping API about the address space that is
> accessible through DMA (and thus in which address range buffers must be
> placed).
>
> I wonder why the omap3isp driver works without a
> vb2_dma_contig_set_max_seg_size() call. Sakari, any insight ?

I checked the usage of vb2_dma_contig_set_max_seg_size(). What it
does is to allocate dev->dma_parms and call dma_set_max_seg_size().

Allocating dev->dma_parms change the behavior of 2 function pairs
(inlined at dma_mapping.h):

1) dma_get_seg_boundary() / dma_set_seg_boundary()

As no media drivers use dev->dma_parms->segment_boundary_mask,
it will keep returning DMA_BIT_MASK(32), either calling or not
the VB2-specific function.

1) dma_get_max_seg_size() / dma_set_max_seg_size()

Checking where dma_get_max_seg_size() is used returns:

$ git grep dma_get_max_seg_size
arch/alpha/kernel/pci_iommu.c: max_seg_size = dev ? dma_get_max_seg_size(dev) : 0;
arch/arm/mm/dma-mapping.c: unsigned int max = dma_get_max_seg_size(dev);
arch/ia64/hp/common/sba_iommu.c: unsigned int max_seg_size = dma_get_max_seg_size(dev);
arch/powerpc/kernel/iommu.c: max_seg_size = dma_get_max_seg_size(dev);
arch/s390/pci/pci_dma.c: unsigned int max = dma_get_max_seg_size(dev);
arch/sparc/kernel/iommu.c: max_seg_size = dma_get_max_seg_size(dev);
arch/sparc/kernel/pci_sun4v.c: max_seg_size = dma_get_max_seg_size(dev);
arch/x86/kernel/amd_gart_64.c: max_seg_size = dma_get_max_seg_size(dev);
drivers/firewire/sbp2.c: if (dma_get_max_seg_size(device->card->device) > SBP2_MAX_SEG_SIZE)
drivers/iio/buffer/industrialio-buffer-dmaengine.c: dmaengine_buffer->max_size = dma_get_max_seg_size(chan->device->dev);
drivers/iommu/dma-iommu.c: unsigned int cur_len = 0, max_len = dma_get_max_seg_size(dev);
drivers/media/common/videobuf2/videobuf2-dma-contig.c: if (dma_get_max_seg_size(dev) < size)
drivers/mmc/host/mmci.c: unsigned int max_seg_size = dma_get_max_seg_size(dev);
drivers/mmc/host/mmci.c: unsigned int max_seg_size = dma_get_max_seg_size(dev);
drivers/mmc/host/mxcmmc.c: mmc->max_seg_size = dma_get_max_seg_size(
drivers/mmc/host/mxs-mmc.c: mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev);
drivers/parisc/iommu-helpers.h: unsigned int max_seg_size = min(dma_get_max_seg_size(dev),
drivers/scsi/scsi_lib.c: blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
drivers/spi/spi.c: unsigned int max_seg_size = dma_get_max_seg_size(dev);
include/linux/dma-mapping.h:static inline unsigned int dma_get_max_seg_size(struct device *dev)
lib/dma-debug.c: unsigned int max_range = dma_get_max_seg_size(ref->dev);
sound/soc/soc-generic-dmaengine-pcm.c: hw.period_bytes_max = dma_get_max_seg_size(dma_dev);

As vb2_dma_contig_set_max_seg_size() is called only on ARM drivers
for Exynos and Mediatek, we only need to check where it is used inside
arch/arm/mm/dma-mapping.c. There, only __iommu_map_sg() function
calls it. So, except if mis-named, I would be expecting it to be used
only for Scatter/Gather DMA.

So, it seems that, with the current code, setting it for dma_contig
probably does nothing.

Please double-check, as things like that can be tricky.

IMO, it is worth removing vb2_dma_contig_set_max_seg_size() and be sure that
the drivers calls it are calling dma_coerce_mask_and_coherent().

Thanks,
Mauro

\
 
 \ /
  Last update: 2018-05-15 12:32    [W:0.061 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site