lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/2] drm/bridge: sii902x: add optional power supplies
Date
Hi Philippe,

On Monday, 14 May 2018 21:58:48 EEST Philippe CORNU wrote:
> On 05/14/2018 12:33 PM, Andrzej Hajda wrote:
> > On 14.05.2018 11:38, Philippe CORNU wrote:
> >> On 04/25/2018 09:53 AM, Philippe Cornu wrote:
> >>> Add the optional power supplies using the description found in
> >>> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".
> >>>
> >>> The sii902x input IOs are not "io safe" so it is important to
> >>> enable/disable voltage regulators during probe/remove phases to
> >>> avoid damages.
> >
> > What exactly does it mean? Ie I understand that the chip has some
> > limitations, but why enabling/disabling regulators in probe/remove
> > should solve it?
>
> thank you for your comment.
>
> And sorry for the "bad" explanation in the 2nd paragraph about the fact
> that inputs are not "io safe". I added this 2nd paragraph in v2
> following a good comment from Laurent on adding the management of the
> regulators outside the probe/remove for a better power consumption
> management (enable/disable regulators only when the ic is used for
> displaying something for instance...). But after a deeper analysis, I
> realized that the only way to improve the power consumption is to
> implement & test the sii902x various sleep modes, that is out-of-scope
> of this small patch and also out-of-scope of my test board I use on
> which the sii902x bridge ic power consumption is very low compare to the
> rest of the system...
>
> I will remove this "explanation" in v3 as it creates confusion.

I'd rather keep it and expand it explain why enabling/disabling regulators at
probe/remove solves the problem. Your patch otherwise looks OK (although if
you submit a v3 anyway you could also rename err_disable_regulator to
err_disable_regulators).

> >>> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> >>> ---
> >>>
> >>> drivers/gpu/drm/bridge/sii902x.c | 38 ++++++++++++++++++++++++++++++----
> >>> 1 file changed, 34 insertions(+), 4 deletions(-)

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2018-05-15 09:36    [W:0.049 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site