lkml.org 
[lkml]   [2018]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/3] thermal: imx: remove cpufreq cooling registration
Date


Anson Huang
Best Regards!


> -----Original Message-----
> From: Bastian Stender [mailto:bst@pengutronix.de]
> Sent: Monday, May 14, 2018 4:37 PM
> To: Anson Huang <anson.huang@nxp.com>; shawnguo@kernel.org;
> s.hauer@pengutronix.de; kernel@pengutronix.de; Fabio Estevam
> <fabio.estevam@nxp.com>; robh+dt@kernel.org; mark.rutland@arm.com;
> rjw@rjwysocki.net; viresh.kumar@linaro.org; rui.zhang@intel.com;
> edubezval@gmail.com
> Cc: devicetree@vger.kernel.org; linux-pm@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 1/3] thermal: imx: remove cpufreq cooling registration
>
> Hi,
>
> On 05/14/2018 10:09 AM, Anson Huang wrote:
> > This patch removes cpufreq cooling registration in thermal .probe
> > function, cpufreq cooling should be done in cpufreq driver when it is
> > ready.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>
> It seems you are trying to achieve something similar to a patch I sent a couple
> of month ago. Unfortunately I did not have the time to rework it yet:
>
>
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch
> work.kernel.org%2Fpatch%2F10059085%2F&data=02%7C01%7Canson.huang
> %40nxp.com%7C179da3635cab4a14deef08d5b975ecb6%7C686ea1d3bc2b4c6f
> a92cd99c5c301635%7C0%7C0%7C636618838508978629&sdata=BcQ9tc%2BE
> CZ%2Fk4AsZFxshgmvSsPg7eRN0ASzP8LO8yBI%3D&reserved=0
>
> Some of the comments might apply here too.

Ah, I did NOT notice this thread, so how to proceed, will you continue to finish your patch?
If yes, then you can just ignore/skip my patch, thanks.

Anson.

>
> Regards,
> Bastian
>
> > ---
> > drivers/thermal/imx_thermal.c | 16 ----------------
> > 1 file changed, 16 deletions(-)
> >
> > diff --git a/drivers/thermal/imx_thermal.c
> > b/drivers/thermal/imx_thermal.c index c30dc21..8eedb97 100644
> > --- a/drivers/thermal/imx_thermal.c
> > +++ b/drivers/thermal/imx_thermal.c
> > @@ -9,7 +9,6 @@
> >
> > #include <linux/clk.h>
> > #include <linux/cpufreq.h>
> > -#include <linux/cpu_cooling.h>
> > #include <linux/delay.h>
> > #include <linux/device.h>
> > #include <linux/init.h>
> > @@ -207,7 +206,6 @@ static struct thermal_soc_data thermal_imx7d_data
> = {
> > struct imx_thermal_data {
> > struct cpufreq_policy *policy;
> > struct thermal_zone_device *tz;
> > - struct thermal_cooling_device *cdev;
> > enum thermal_device_mode mode;
> > struct regmap *tempmon;
> > u32 c1, c2; /* See formula in imx_init_calib() */ @@ -729,22
> > +727,12 @@ static int imx_thermal_probe(struct platform_device *pdev)
> > return -EPROBE_DEFER;
> > }
> >
> > - data->cdev = cpufreq_cooling_register(data->policy);
> > - if (IS_ERR(data->cdev)) {
> > - ret = PTR_ERR(data->cdev);
> > - dev_err(&pdev->dev,
> > - "failed to register cpufreq cooling device: %d\n", ret);
> > - cpufreq_cpu_put(data->policy);
> > - return ret;
> > - }
> > -
> > data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
> > if (IS_ERR(data->thermal_clk)) {
> > ret = PTR_ERR(data->thermal_clk);
> > if (ret != -EPROBE_DEFER)
> > dev_err(&pdev->dev,
> > "failed to get thermal clk: %d\n", ret);
> > - cpufreq_cooling_unregister(data->cdev);
> > cpufreq_cpu_put(data->policy);
> > return ret;
> > }
> > @@ -759,7 +747,6 @@ static int imx_thermal_probe(struct platform_device
> *pdev)
> > ret = clk_prepare_enable(data->thermal_clk);
> > if (ret) {
> > dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
> > - cpufreq_cooling_unregister(data->cdev);
> > cpufreq_cpu_put(data->policy);
> > return ret;
> > }
> > @@ -775,7 +762,6 @@ static int imx_thermal_probe(struct platform_device
> *pdev)
> > dev_err(&pdev->dev,
> > "failed to register thermal zone device %d\n", ret);
> > clk_disable_unprepare(data->thermal_clk);
> > - cpufreq_cooling_unregister(data->cdev);
> > cpufreq_cpu_put(data->policy);
> > return ret;
> > }
> > @@ -811,7 +797,6 @@ static int imx_thermal_probe(struct platform_device
> *pdev)
> > dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
> > clk_disable_unprepare(data->thermal_clk);
> > thermal_zone_device_unregister(data->tz);
> > - cpufreq_cooling_unregister(data->cdev);
> > cpufreq_cpu_put(data->policy);
> > return ret;
> > }
> > @@ -831,7 +816,6 @@ static int imx_thermal_remove(struct
> platform_device *pdev)
> > clk_disable_unprepare(data->thermal_clk);
> >
> > thermal_zone_device_unregister(data->tz);
> > - cpufreq_cooling_unregister(data->cdev);
> > cpufreq_cpu_put(data->policy);
> >
> > return 0;
> >
>
> --
> Pengutronix e.K.
> Industrial Linux Solutions
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> pengutronix.de%2F&data=02%7C01%7Canson.huang%40nxp.com%7C179da36
> 35cab4a14deef08d5b975ecb6%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0
> %7C0%7C636618838508978629&sdata=kHHjnbmj2kV0aPlAvULXUh%2Fm%2Fp
> gbu21luMQ6jfIUgLo%3D&reserved=0
> Peiner Str. 6-8, 31137 Hildesheim, Germany Amtsgericht Hildesheim, HRA 2686
\
 
 \ /
  Last update: 2018-05-14 11:11    [W:0.106 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site