lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 1/3] arcnet: com20020: Add memory map of com20020
On Fri, May 11, 2018 at 5:50 AM, Andrea Greco
<andrea.greco.gapmilano@gmail.com> wrote:
> On 05/08/2018 06:16 PM, Rob Herring wrote:
>> On Sat, May 05, 2018 at 11:34:45PM +0200, Andrea Greco wrote:
>>> From: Andrea Greco <a.greco@4sigma.it>
>>>
>>> Add support for com20022I/com20020, memory mapped chip version.
>>> Support bus: Intel 80xx and Motorola 68xx.
>>> Bus size: Only 8 bit bus size is supported.
>>> Added related device tree bindings
>>>
>>> Signed-off-by: Andrea Greco <a.greco@4sigma.it>
>>> ---
>>> .../devicetree/bindings/net/smsc-com20020.txt | 23 +++
>>
>> Please split bindings to separate patch.
>
> Ok
>>
>>> drivers/net/arcnet/Kconfig | 12 +-
>>> drivers/net/arcnet/Makefile | 1 +
>>> drivers/net/arcnet/arcdevice.h | 27 ++-
>>> drivers/net/arcnet/com20020-membus.c | 191 +++++++++++++++++++++
>>> drivers/net/arcnet/com20020.c | 9 +-
>>> 6 files changed, 253 insertions(+), 10 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/net/smsc-com20020.txt
>>> create mode 100644 drivers/net/arcnet/com20020-membus.c
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/smsc-com20020.txt b/Documentation/devicetree/bindings/net/smsc-com20020.txt
>>> new file mode 100644
>>> index 000000000000..39c5b19c55af
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/net/smsc-com20020.txt
>>> @@ -0,0 +1,23 @@
>>> +SMSC com20020, com20022I
>>
>> What does this device do?
>>
>
> Changed in:
> SMSC com20020 Arcnet network controller
>
>>> +
>>> +timeout: Arcnet timeout, checkout datashet
>>> +clockp: Clock Prescaler, checkout datashet
>>
>> s/datashet/datasheet/
>>
>>> +clockm: Clock multiplier, checkout datasheet
>>
>> Would these 3 properties be common for arcnet devices? If not, then they
>> should have a vendor prefix.
>>
>
> Timeout is arcnet propelty:
> Other is smsc params, then become:
> - timeout: Arcnet timeout

Needs unit suffix as defined in property-units.txt.

> - smsc-clockp: Clock Prescaler
> - smsc-clockm: Clock multiplier
> - smsc-backplane: Controller use backplane mode inside of transceiver

Vendor properties are <vendor>,<prop-name>.

>
> I forget backplane propelty, but is required
>
>>> +
>>> +phy-reset-gpios: Chip reset ppin
>>
>> Use 'reset-gpios' as that is standard.
>>
>>> +phy-irq-gpios: Chip irq pin
>>
>> Use 'interrupts'. Interrupt capable gpio controllers are also interrupt
>> controllers.
>>
>
> Ok, change to standard
>
>>> +
>>> +com20020_A@0 {
>>
>> Node names should be generic based on the class of device. I don't think
>> we have one defined, but how about 'arcnet'.
>>
>> Unit addresses must have a corresponding reg property. How is this
>> device accessed?
>>
>
> Then: arcnet@28000000
>
>>> + compatible = "smsc,com20020";
>>
>> Not documented.
>>
> I miss something? Where add this doc?
> Is not this file?

Yes, this file up above with all the other properties. The example is
just an example, not a binding definition.

Rob

\
 
 \ /
  Last update: 2018-05-11 15:36    [W:0.024 / U:3.336 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site