lkml.org 
[lkml]   [2018]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clk: x86: Add ST oscout platform clock
Date
Quoting Akshu Agrawal (2018-04-30 00:06:53)
> diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
> index 1367afb..f7ebae1 100644
> --- a/drivers/clk/x86/Makefile
> +++ b/drivers/clk/x86/Makefile
> @@ -1,3 +1,4 @@
> clk-x86-lpss-objs := clk-lpt.o
> obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
> obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
> +obj-$(CONFIG_X86) += clk-st.o

No desire to make a Kconfig for this driver so it isn't included all the
time on x86 devices that don't have this hardware?

> diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
> new file mode 100644
> index 0000000..6ac0dc5
> --- /dev/null
> +++ b/drivers/clk/x86/clk-st.c
> @@ -0,0 +1,80 @@
> +/*
> + * clock framework for AMD Stoney based clocks
> + *
> + * Copyright 2018 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.

Can you use the SPDX tags here?

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/platform_data/clk-st.h>
> +#include <linux/platform_device.h>
> +
> +/* Clock Driving Strength 2 register */
> +#define CLKDRVSTR2 0x28
> +/* Clock Control 1 register */
> +#define MISCCLKCNTL1 0x40
> +/* Auxiliary clock1 enable bit */
> +#define OSCCLKENB 2
> +/* 25Mhz auxiliary output clock freq bit */
> +#define OSCOUT1CLK25MHZ 16
> +
> +static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
> +
> +static int st_clk_probe(struct platform_device *pdev)
> +{
> + struct st_clk_data *st_data;
> + struct clk *clk_48m;
> + struct clk *clk_25m;
> + struct clk *clk_oscout1_mux;
> + struct clk *clk_oscout1;
> +
> + st_data = dev_get_platdata(&pdev->dev);
> + if (!st_data || !st_data->base)
> + return -EINVAL;
> +
> + clk_48m = clk_register_fixed_rate(NULL, "clk48MHz", NULL, 0,
> + 48000000);
> + clk_25m = clk_register_fixed_rate(NULL, "clk25MHz", NULL, 0,
> + 25000000);
> +
> + clk_oscout1_mux = clk_register_mux(NULL, "oscout1_mux",
> + clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
> + 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
> +
> + clk_set_parent(clk_oscout1_mux, clk_25m);
> +
> + clk_oscout1 = clk_register_gate(NULL, "oscout1", "oscout1_mux",
> + 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
> + CLK_GATE_SET_TO_DISABLE, NULL);
> +
> + clk_register_clkdev(clk_oscout1, "oscout1", NULL);

Can you use the clk_hw registration and clkdev APIs? It would mean that
clk_set_parent() call up above would still be needed but I guess that's
OK. We don't currently have a way for non-DT based drivers to configure
the parents of a clk when it's registered.

> +
> + return 0;
> +}
> +
> diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h
> new file mode 100644
> index 0000000..5ede980
> --- /dev/null
> +++ b/include/linux/platform_data/clk-st.h
> @@ -0,0 +1,32 @@
> +/*
> + * clock framework for AMD Stoney based clock
> + *
> + * Copyright 2018 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef __CLK_ST_H
> +#define __CLK_ST_H
> +
> +struct st_clk_data {
> + void __iomem *base;

Can you include compiler.h in this file for the __iomem usage?

\
 
 \ /
  Last update: 2018-05-01 23:58    [W:1.529 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site