lkml.org 
[lkml]   [2018]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[tiL4.14-CON PATCH v2] ARM: dts: am437x-sk-evm: add wilink8 support
    Date
    enable mmc3 used for wlan and uart1 used for bluetooth
    configure the gpios used for wlan and bluetooth controls
    add fixed voltage regulator used for wlan power control

    Signed-off-by: Eyal Reizer <eyalr@ti.com>
    ---
    arch/arm/boot/dts/am437x-sk-evm.dts | 115 ++++++++++++++++++++++++++++++++++++
    1 file changed, 115 insertions(+)

    diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
    index 16d9db0..afffdb1 100644
    --- a/arch/arm/boot/dts/am437x-sk-evm.dts
    +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
    @@ -15,6 +15,7 @@
    #include <dt-bindings/pwm/pwm.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/input/input.h>
    +#include <dt-bindings/interrupt-controller/irq.h>

    / {
    model = "TI AM437x SK EVM";
    @@ -158,6 +159,22 @@
    };
    };
    };
    +
    + vmmcwl_fixed: fixedregulator-mmcwl {
    + /*
    + * WL_EN is not SDIO standard compliant. It is an out of band
    + * signal and hard to be dealt with in a standard way by the
    + * SDIO core driver.
    + * So modelling the WL_EN line as a regulator was a natural
    + * choice as the MMC core already deals with MMC supplies.
    + */
    + compatible = "regulator-fixed";
    + regulator-name = "vmmcwl_fixed";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
    + enable-active-high;
    + };
    };

    &am43xx_pinmux {
    @@ -424,6 +441,62 @@
    AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
    >;
    };
    +
    + mmc3_pins_default: pinmux_mmc3_pins_default {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
    + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
    + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
    + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
    + AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
    + AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
    + >;
    + };
    +
    + mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
    + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
    + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
    + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
    + AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
    + AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
    + >;
    + };
    +
    + wlan_pins_default: pinmux_wlan_pins_default {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
    + AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
    + >;
    + };
    +
    + wlan_pins_sleep: pinmux_wlan_pins_sleep {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
    + AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
    + >;
    + };
    +
    + uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */
    + AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
    + AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
    + AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
    + AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
    + >;
    + };
    +
    + uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
    + pinctrl-single,pins = <
    + AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */
    + AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */
    + AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
    + AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
    + AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
    + >;
    + };
    };

    &i2c0 {
    @@ -606,6 +679,10 @@
    status = "okay";
    };

    +&gpio4 {
    + status = "okay";
    +};
    +
    &gpio5 {
    status = "okay";
    };
    @@ -620,6 +697,44 @@
    cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
    };

    +&uart1 {
    + status = "okay";
    + pinctrl-names = "default", "sleep";
    + pinctrl-0 = <&uart1_bt_pins_default>;
    + pinctrl-1 = <&uart1_bt_pins_sleep>;
    +};
    +
    +&mmc3 {
    + status = "okay";
    + /*
    + * these are on the crossbar and are outlined in the
    + * xbar-event-map element
    + */
    + dmas = <&edma_xbar 30 0 1>,
    + <&edma_xbar 31 0 2>;
    + dma-names = "tx", "rx";
    + vmmc-supply = <&vmmcwl_fixed>;
    + bus-width = <4>;
    + pinctrl-names = "default", "sleep";
    + pinctrl-0 = <&mmc3_pins_default>;
    + pinctrl-1 = <&mmc3_pins_sleep>;
    + cap-power-off-card;
    + keep-power-in-suspend;
    + ti,non-removable;
    +
    + #address-cells = <1>;
    + #size-cells = <0>;
    + wlcore: wlcore@0 {
    + compatible = "ti,wl1835";
    + pinctrl-names = "default", "sleep";
    + pinctrl-0 = <&wlan_pins_default>;
    + pinctrl-1 = <&wlan_pins_sleep>;
    + reg = <2>;
    + interrupt-parent = <&gpio4>;
    + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
    + };
    +};
    +
    &usb2_phy1 {
    status = "okay";
    };
    --
    2.7.4
    \
     
     \ /
      Last update: 2018-05-01 09:14    [W:2.262 / U:0.772 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site