lkml.org 
[lkml]   [2018]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 10/14] dt-bindings: Add support for SAW documentation
On Fri, Mar 30, 2018 at 12:26:43AM +0300, Ilia Lin wrote:
> Add support for SAW controlled regulators in 8x96.
> Document it.

Perhaps some clue in the subject what subsystem and/or device this
applies to.

>
> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
> ---
> .../bindings/regulator/qcom,spmi-regulator.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
> index 57d2c65..406f2e5 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
> @@ -110,6 +110,11 @@ Qualcomm SPMI Regulators
> Definition: Reference to regulator supplying the input pin, as
> described in the data sheet.
>
> +- qcom,saw-reg:
> + Usage: optional
> + Value type: <phandle>
> + Description: Reference to syscon node defining the SAW registers.
> +
>
> The regulator node houses sub-nodes for each regulator within the device. Each
> sub-node is identified using the node's name, with valid values listed for each
> @@ -201,6 +206,17 @@ see regulator.txt - with additional custom properties described below:
> 2 = 0.55 uA
> 3 = 0.75 uA
>
> +- qcom,saw-slave:
> + Usage: optional
> + Value type: <boo>
> + Description: SAW controlled gang slave. Will not be configured.
> +
> +- qcom,saw-leader:
> + Usage: optional
> + Value type: <boo>
> + Description: SAW controlled gang leader. Will be configured as
> + SAW regulator.

Would the coupled regulator binding work in this case?

Rob

\
 
 \ /
  Last update: 2018-04-09 22:22    [W:0.041 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site