lkml.org 
[lkml]   [2018]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] vhost-net: set packet weight of tx polling to 2 * vq size
On Mon, Apr 09, 2018 at 04:09:20AM +0000, haibinzhang(张海斌) wrote:
>
> > On Fri, Apr 06, 2018 at 08:22:37AM +0000, haibinzhang(张海斌) wrote:
> > > handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
> > > polling udp packets with small length(e.g. 1byte udp payload), because setting
> > > VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.
> > >
> > > Ping-Latencies shown below were tested between two Virtual Machines using
> > > netperf (UDP_STREAM, len=1), and then another machine pinged the client:
> > >
> > > Packet-Weight Ping-Latencies(millisecond)
> > > min avg max
> > > Origin 3.319 18.489 57.303
> > > 64 1.643 2.021 2.552
> > > 128 1.825 2.600 3.224
> > > 256 1.997 2.710 4.295
> > > 512 1.860 3.171 4.631
> > > 1024 2.002 4.173 9.056
> > > 2048 2.257 5.650 9.688
> > > 4096 2.093 8.508 15.943
> >
> > And this is with Q size 256 right?
>
> Yes. Ping-latencies with 512 VQ size show below.
>
> Packet-Weight Ping-Latencies(millisecond)
> min avg max
> Origin 6.357 29.177 66.245
> 64 2.798 3.614 4.403
> 128 2.861 3.820 4.775
> 256 3.008 4.018 4.807
> 512 3.254 4.523 5.824
> 1024 3.079 5.335 7.747
> 2048 3.944 8.201 12.762
> 4096 4.158 11.057 19.985
>
> We will submit again. Is there anything else?

Seems pretty consistent, a small dip at 2 VQ sizes.


Acked-by: Michael S. Tsirkin <mst@redhat.com>

> >
> > > Ring size is a hint from device about a burst size it can tolerate. Based on
> > > benchmarks, set the weight to 2 * vq size.
> > >
> > > To evaluate this change, another tests were done using netperf(RR, TX) between
> > > two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was
> > > tweaked through qemu. Results shown below does not show obvious changes.
> >
> > What I asked for is ping-latency with different VQ sizes,
> > streaming below does not show anything.
> >
> > > vq size=256 TCP_RR vq size=512 TCP_RR
> > > size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
> > > 1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2%
> > > 1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0%
> > > 1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1%
> > > 64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3%
> > > 64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1%
> > > 64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2%
> > > 256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2%
> > > 256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2%
> > > 256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1%
> > >
> > > vq size=256 UDP_RR vq size=512 UDP_RR
> > > size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
> > > 1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2%
> > > 1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2%
> > > 1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0%
> > > 64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1%
> > > 64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0%
> > > 64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1%
> > > 256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0%
> > > 256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4%
> > > 256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1%
> > >
> > > vq size=256 TCP_STREAM vq size=512 TCP_STREAM
> > > size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
> > > 64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0%
> > > 64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4%
> > > 64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2%
> > > 256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1%
> > > 256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0%
> > > 256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0%
> > > 512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1%
> > > 512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0%
> > > 512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1%
> > > 1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1%
> > > 1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0%
> > > 1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0%
> > > 2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0%
> > > 2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1%
> > > 2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1%
> > > 4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0%
> > > 4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0%
> > > 4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1%
> > >
> > > Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
> > > Signed-off-by: Yunfang Tai <yunfangtai@tencent.com>
> > > Signed-off-by: Lidong Chen <lidongchen@tencent.com>
> >
> > Code is fine but I'd like to see validation of the heuristic
> > 2*vq->num with another vq size.
> >
> >
> >
> > > ---
> > > drivers/vhost/net.c | 8 +++++++-
> > > 1 file changed, 7 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> > > index 8139bc70ad7d..3563a305cc0a 100644
> > > --- a/drivers/vhost/net.c
> > > +++ b/drivers/vhost/net.c
> > > @@ -44,6 +44,10 @@ MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
> > > * Using this limit prevents one virtqueue from starving others. */
> > > #define VHOST_NET_WEIGHT 0x80000
> > >
> > > +/* Max number of packets transferred before requeueing the job.
> > > + * Using this limit prevents one virtqueue from starving rx. */
> > > +#define VHOST_NET_PKT_WEIGHT(vq) ((vq)->num * 2)
> > > +
> > > /* MAX number of TX used buffers for outstanding zerocopy */
> > > #define VHOST_MAX_PEND 128
> > > #define VHOST_GOODCOPY_LEN 256
> > > @@ -473,6 +477,7 @@ static void handle_tx(struct vhost_net *net)
> > > struct socket *sock;
> > > struct vhost_net_ubuf_ref *uninitialized_var(ubufs);
> > > bool zcopy, zcopy_used;
> > > + int sent_pkts = 0;
> > >
> > > mutex_lock(&vq->mutex);
> > > sock = vq->private_data;
> > > @@ -580,7 +585,8 @@ static void handle_tx(struct vhost_net *net)
> > > else
> > > vhost_zerocopy_signal_used(net, vq);
> > > vhost_net_tx_packet(net);
> > > - if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
> > > + if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
> > > + unlikely(++sent_pkts >= VHOST_NET_PKT_WEIGHT(vq))) {
> > > vhost_poll_queue(&vq->poll);
> > > break;
> > > }
> > > --
> > > 2.12.3
> > >
>

\
 
 \ /
  Last update: 2018-04-09 07:47    [W:0.067 / U:2.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site