lkml.org 
[lkml]   [2018]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v4 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
From
Date
On Sun, 2018-04-08 at 11:19 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
>
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/Makefile | 2 +-
> drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 31 ++++++++
> 3 files changed, 196 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 555ab9c6ab64..fa6d1e36cef6 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -5,5 +5,5 @@
> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o meson-aoclk.o gxbb-aoclk.o gxbb-aoclk-32k.o
> -obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
> +obj-$(CONFIG_COMMON_CLK_AXG) += axg.o meson-aoclk.o axg-aoclk.o
^
As hinted in patch 1, not ending well =======|

You are putting this object in 2 modules.
What you should have done is :
- Add a Kconfig CONFIG_COMMON_CLK_MESON_AO (same as CONFIG_COMMON_CLK_AMLOGIC)
selected by GXBB and AXG.
- Compile meson-aoclk.o according to this new configuration

> obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
> diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
> new file mode 100644
> index 000000000000..cb56d809d3df
> --- /dev/null
> +++ b/drivers/clk/meson/axg-aoclk.c
> @@ -0,0 +1,164 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Amlogic Meson-AXG Clock Controller Driver
> + *
> + * Copyright (c) 2016 Baylibre SAS.
> + * Author: Michael Turquette <mturquette@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/init.h>
> +#include "clkc.h"
> +#include "axg-aoclk.h"
> +
> +#define AXG_AO_GATE(_name, _bit) \
> +static struct clk_regmap _name##_ao = { \
> + .data = &(struct clk_regmap_gate_data) { \
> + .offset = (AO_RTI_GEN_CNTL_REG0), \
> + .bit_idx = (_bit), \
> + }, \
> + .hw.init = &(struct clk_init_data) { \
> + .name = #_name "_ao", \
> + .ops = &clk_regmap_gate_ops, \
> + .parent_names = (const char *[]){ "clk81" }, \
> + .num_parents = 1, \
> + .flags = CLK_IGNORE_UNUSED, \
> + }, \
> +}
> +
> +AXG_AO_GATE(remote, 0);
> +AXG_AO_GATE(i2c_master, 1);
> +AXG_AO_GATE(i2c_slave, 2);
> +AXG_AO_GATE(uart1, 3);
> +AXG_AO_GATE(uart2, 5);
> +AXG_AO_GATE(ir_blaster, 6);
> +AXG_AO_GATE(saradc, 7);
> +
> +static struct clk_regmap ao_clk81 = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_RTI_PWR_CNTL_REG0,
> + .mask = 0x1,
> + .shift = 8,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_clk81",
> + .ops = &clk_regmap_mux_ro_ops,
> + .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
> + .num_parents = 2,
> + },
> +};
> +
> +static struct clk_regmap axg_saradc_mux = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_SAR_CLK,
> + .mask = 0x3,
> + .shift = 9,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "axg_saradc_mux",
> + .ops = &clk_regmap_mux_ops,
> + .parent_names = (const char *[]){ "xtal", "ao_clk81" },
> + .num_parents = 2,
> + },
> +};
> +
> +static struct clk_regmap axg_saradc_div = {
> + .data = &(struct clk_regmap_div_data) {
> + .offset = AO_SAR_CLK,
> + .shift = 0,
> + .width = 8,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "axg_saradc_div",
> + .ops = &clk_regmap_divider_ops,
> + .parent_names = (const char *[]){ "axg_saradc_mux" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap axg_saradc_gate = {
> + .data = &(struct clk_regmap_gate_data) {
> + .offset = AO_SAR_CLK,
> + .bit_idx = 8,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "axg_saradc_gate",
> + .ops = &clk_regmap_gate_ops,
> + .parent_names = (const char *[]){ "axg_saradc_div" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static const unsigned int axg_aoclk_reset[] = {
> + [RESET_AO_REMOTE] = 16,
> + [RESET_AO_I2C_MASTER] = 18,
> + [RESET_AO_I2C_SLAVE] = 19,
> + [RESET_AO_UART1] = 17,
> + [RESET_AO_UART2] = 22,
> + [RESET_AO_IR_BLASTER] = 23,
> +};
> +
> +static struct clk_regmap *axg_aoclk_regmap[] = {
> + [CLKID_AO_REMOTE] = &remote_ao,
> + [CLKID_AO_I2C_MASTER] = &i2c_master_ao,
> + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao,
> + [CLKID_AO_UART1] = &uart1_ao,
> + [CLKID_AO_UART2] = &uart2_ao,
> + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
> + [CLKID_AO_SAR_ADC] = &saradc_ao,
> + [CLKID_AO_CLK81] = &ao_clk81,
> + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux,
> + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div,
> + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate,
> +};
> +
> +static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
> + .hws = {
> + [CLKID_AO_REMOTE] = &remote_ao.hw,
> + [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
> + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw,
> + [CLKID_AO_UART1] = &uart1_ao.hw,
> + [CLKID_AO_UART2] = &uart2_ao.hw,
> + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
> + [CLKID_AO_SAR_ADC] = &saradc_ao.hw,
> + [CLKID_AO_CLK81] = &ao_clk81.hw,
> + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux.hw,
> + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div.hw,
> + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate.hw,
> + },
> + .num = NR_CLKS,
> +};
> +
> +static const struct meson_aoclk_data axg_aoclkc_data = {
> + .reset_reg = AO_RTI_GEN_CNTL_REG0,
> + .num_reset = ARRAY_SIZE(axg_aoclk_reset),
> + .reset = axg_aoclk_reset,
> + .num_clks = ARRAY_SIZE(axg_aoclk_regmap),
> + .clks = axg_aoclk_regmap,
> + .hw_data = &axg_aoclk_onecell_data,
> +};
> +
> +static const struct of_device_id axg_aoclkc_match_table[] = {
> + {
> + .compatible = "amlogic,meson-axg-aoclkc",
> + .data = &axg_aoclkc_data,
> + },
> + { }
> +};
> +
> +static struct platform_driver axg_aoclkc_driver = {
> + .probe = meson_aoclkc_probe,
> + .driver = {
> + .name = "axg-aoclkc",
> + .of_match_table = axg_aoclkc_match_table,
> + },
> +};
> +
> +builtin_platform_driver(axg_aoclkc_driver);
> diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
> new file mode 100644
> index 000000000000..396cd3023064
> --- /dev/null
> +++ b/drivers/clk/meson/axg-aoclk.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2017 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +
> +#ifndef __AXG_AOCLKC_H
> +#define __AXG_AOCLKC_H
> +
> +#include "meson-aoclk.h"
> +
> +#define NR_CLKS 11
> +/* AO Configuration Clock registers offsets
> + * Register offsets from the data sheet must be multiplied by 4.
> + */
> +#define AO_RTI_PWR_CNTL_REG1 0x0C
> +#define AO_RTI_PWR_CNTL_REG0 0x10
> +#define AO_RTI_GEN_CNTL_REG0 0x40
> +#define AO_OSCIN_CNTL 0x58
> +#define AO_CRT_CLK_CNTL1 0x68
> +#define AO_SAR_CLK 0x90
> +#define AO_RTC_ALT_CLK_CNTL0 0x94
> +#define AO_RTC_ALT_CLK_CNTL1 0x98
> +
> +#include <dt-bindings/clock/axg-aoclkc.h>
> +#include <dt-bindings/reset/axg-aoclkc.h>
> +
> +#endif /* __AXG_AOCLKC_H */
\
 
 \ /
  Last update: 2018-04-09 14:09    [W:0.084 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site