lkml.org 
[lkml]   [2018]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.14 074/161] fm10k: fix "failed to kill vid" message for VF
Date
From: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>

[ Upstream commit cf315ea596ec26d7aa542a9ce354990875a920c0 ]

When a VF is under PF VLAN assignment:

ip link set <pf> vf <#> vlan <vid>

This will remove all previous entries in the VLAN table including those
generated by VLAN interfaces created on the VF. The issue arises when
the VF is under PF VLAN assignment and one or more of these VLAN
interfaces of the VF are deleted. When deleting these VLAN interfaces,
the following message will be generated in "dmesg":

failed to kill vid 0081/<vid> for device <vf>

This is due to the fact that "ndo_vlan_rx_kill_vid" exits with an error.
The handler for this ndo is "fm10k_update_vid". Any calls to this
function while under PF VLAN management will exit prematurely and, thus,
it will generate the failure message.

Additionally, since "fm10k_update_vid" exits prematurely, none of the
VLAN update is performed. So, even though the actual VLAN interfaces of
the VF will be deleted, the active_vlans bitmask is not cleared. When
the VF is no longer under PF VLAN assignment, the driver mistakenly
restores the previous entries of the VLAN table based on an
unsynchronized list of active VLANs.

The solution to this issue involves checking the VLAN update action type
before exiting "fm10k_update_vid". If the VLAN update action type is to
"add", this action will not be permitted while the VF is under PF VLAN
assignment and the VLAN update is abandoned like before.

However, if the VLAN update action type is to "kill", then we need to
also clear the active_vlans bitmask. However, we don't need to actually
queue any messages to the PF, because the MAC and VLAN tables have
already been cleared, and the PF would silently ignore these requests
anyways.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index e69d49d91d67..914258310ddd 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -815,8 +815,12 @@ static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set)
if (vid >= VLAN_N_VID)
return -EINVAL;

- /* Verify we have permission to add VLANs */
- if (hw->mac.vlan_override)
+ /* Verify that we have permission to add VLANs. If this is a request
+ * to remove a VLAN, we still want to allow the user to remove the
+ * VLAN device. In that case, we need to clear the bit in the
+ * active_vlans bitmask.
+ */
+ if (set && hw->mac.vlan_override)
return -EACCES;

/* update active_vlans bitmask */
@@ -835,6 +839,12 @@ static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set)
rx_ring->vid &= ~FM10K_VLAN_CLEAR;
}

+ /* If our VLAN has been overridden, there is no reason to send VLAN
+ * removal requests as they will be silently ignored.
+ */
+ if (hw->mac.vlan_override)
+ return 0;
+
/* Do not remove default VLAN ID related entries from VLAN and MAC
* tables
*/
--
2.15.1
\
 
 \ /
  Last update: 2018-04-09 05:14    [W:0.834 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site