lkml.org 
[lkml]   [2018]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/2] dt-bindings: usb: rt1711h device tree binding document
Date
From: ShuFan Lee <shufan_lee@richtek.com>

Add device tree binding document for Richtek RT1711H Type-C chip driver

Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
---
.../devicetree/bindings/usb/richtek,rt1711h.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt

changelogs between v2 & v3
- add dt-bindings for rt1711h typec driver

changelogs between v4 & v5
- remove rt,intr-gpios, always use interrupts property

diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
new file mode 100644
index 000000000000..09e847e92e5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -0,0 +1,17 @@
+Richtek RT1711H TypeC PD Controller.
+
+Required properties:
+ - compatible : Must be "richtek,rt1711h".
+ - reg : Must be 0x4e, it's slave address of RT1711H.
+ - interrupt-parent : the phandle for the interrupt controller that
+ provides interrupts for this device.
+ - interrupts : <a b> where a is the interrupt number and b represents an
+ encoding of the sense and level information for the interrupt.
+
+Example :
+rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ interrupt-parent = <&gpio26>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
--
1.9.1
\
 
 \ /
  Last update: 2018-04-09 04:13    [W:0.049 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site