lkml.org 
[lkml]   [2018]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] iio: afe: rescale: new driver
On Mon, 23 Apr 2018 23:08:09 +0200
Peter Rosin <peda@axentia.se> wrote:

> If an ADC channel measures the midpoint of a voltage divider, the
> interesting voltage is often the voltage over the full resistance.
> E.g. if the full voltage is too big for the ADC to handle.
> Likewise, if an ADC channel measures the voltage across a shunt
> resistor, with or without amplification, the interesting value is
> often the current through the resistor.
>
> This driver solves these problems by allowing to linearly scale a channel
> and/or by allowing changes to the type of the channel.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>

Great work.

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> MAINTAINERS | 1 +
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/afe/Kconfig | 19 +++
> drivers/iio/afe/Makefile | 6 +
> drivers/iio/afe/iio-rescale.c | 359 ++++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 387 insertions(+)
> create mode 100644 drivers/iio/afe/Kconfig
> create mode 100644 drivers/iio/afe/Makefile
> create mode 100644 drivers/iio/afe/iio-rescale.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1b23e9ebff9c..73b8fc5dd2a1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6896,6 +6896,7 @@ S: Maintained
> F: Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt
> F: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
> F: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
> +F: drivers/iio/afe/iio-rescale.c
>
> IKANOS/ADI EAGLE ADSL USB DRIVER
> M: Matthieu Castet <castet.matthieu@free.fr>
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index b3c8c6ef0dff..d69e85a8bdc3 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -70,6 +70,7 @@ config IIO_TRIGGERED_EVENT
>
> source "drivers/iio/accel/Kconfig"
> source "drivers/iio/adc/Kconfig"
> +source "drivers/iio/afe/Kconfig"
> source "drivers/iio/amplifiers/Kconfig"
> source "drivers/iio/chemical/Kconfig"
> source "drivers/iio/common/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index b16b2e9ddc40..d8cba9c229c0 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o
>
> obj-y += accel/
> obj-y += adc/
> +obj-y += afe/
> obj-y += amplifiers/
> obj-y += buffer/
> obj-y += chemical/
> diff --git a/drivers/iio/afe/Kconfig b/drivers/iio/afe/Kconfig
> new file mode 100644
> index 000000000000..c91eef04825a
> --- /dev/null
> +++ b/drivers/iio/afe/Kconfig
> @@ -0,0 +1,19 @@
> +#
> +# Analog Front End drivers
> +#
> +# When adding new entries keep the list in alphabetical order
> +
> +menu "Analog Front Ends"
> +
> +config IIO_RESCALE
> + tristate "IIO rescale"
> + depends on OF || COMPILE_TEST
> + help
> + Say yes here to build support for the IIO rescaling
> + that handles voltage dividers, current sense shunts and
> + current sense amplifiers.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called iio-rescale.
> +
> +endmenu
> diff --git a/drivers/iio/afe/Makefile b/drivers/iio/afe/Makefile
> new file mode 100644
> index 000000000000..5fabb7bcac47
> --- /dev/null
> +++ b/drivers/iio/afe/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for industrial I/O Analog Front Ends (AFE)
> +#
> +
> +# When adding new entries keep the list in alphabetical order
> +obj-$(CONFIG_IIO_RESCALE) += iio-rescale.o
> diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
> new file mode 100644
> index 000000000000..e9ceee66d1e7
> --- /dev/null
> +++ b/drivers/iio/afe/iio-rescale.c
> @@ -0,0 +1,359 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * IIO rescale driver
> + *
> + * Copyright (C) 2018 Axentia Technologies AB
> + *
> + * Author: Peter Rosin <peda@axentia.se>
> + */
> +
> +#include <linux/err.h>
> +#include <linux/gcd.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +struct rescale;
> +
> +struct rescale_cfg {
> + enum iio_chan_type type;
> + int (*props)(struct device *dev, struct rescale *rescale);
> +};
> +
> +struct rescale {
> + const struct rescale_cfg *cfg;
> + struct iio_channel *source;
> + struct iio_chan_spec chan;
> + struct iio_chan_spec_ext_info *ext_info;
> + s32 numerator;
> + s32 denominator;
> +};
> +
> +static int rescale_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct rescale *rescale = iio_priv(indio_dev);
> + unsigned long long tmp;
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + return iio_read_channel_raw(rescale->source, val);
> +
> + case IIO_CHAN_INFO_SCALE:
> + ret = iio_read_channel_scale(rescale->source, val, val2);
> + switch (ret) {
> + case IIO_VAL_FRACTIONAL:
> + *val *= rescale->numerator;
> + *val2 *= rescale->denominator;
> + return ret;
> + case IIO_VAL_INT:
> + *val *= rescale->numerator;
> + if (rescale->denominator == 1)
> + return ret;
> + *val2 = rescale->denominator;
> + return IIO_VAL_FRACTIONAL;
> + case IIO_VAL_FRACTIONAL_LOG2:
> + tmp = *val * 1000000000LL;
> + do_div(tmp, rescale->denominator);
> + tmp *= rescale->numerator;
> + do_div(tmp, 1000000000LL);
> + *val = tmp;
> + return ret;
> + default:
> + return -EOPNOTSUPP;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int rescale_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + struct rescale *rescale = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *type = IIO_VAL_INT;
> + return iio_read_avail_channel_raw(rescale->source,
> + vals, length);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info rescale_info = {
> + .read_raw = rescale_read_raw,
> + .read_avail = rescale_read_avail,
> +};
> +
> +static ssize_t rescale_read_ext_info(struct iio_dev *indio_dev,
> + uintptr_t private,
> + struct iio_chan_spec const *chan,
> + char *buf)
> +{
> + struct rescale *rescale = iio_priv(indio_dev);
> +
> + return iio_read_channel_ext_info(rescale->source,
> + rescale->ext_info[private].name,
> + buf);
> +}
> +
> +static ssize_t rescale_write_ext_info(struct iio_dev *indio_dev,
> + uintptr_t private,
> + struct iio_chan_spec const *chan,
> + const char *buf, size_t len)
> +{
> + struct rescale *rescale = iio_priv(indio_dev);
> +
> + return iio_write_channel_ext_info(rescale->source,
> + rescale->ext_info[private].name,
> + buf, len);
> +}
> +
> +static int rescale_configure_channel(struct device *dev,
> + struct rescale *rescale)
> +{
> + struct iio_chan_spec *chan = &rescale->chan;
> + struct iio_chan_spec const *schan = rescale->source->channel;
> +
> + chan->indexed = 1;
> + chan->output = schan->output;
> + chan->ext_info = rescale->ext_info;
> + chan->type = rescale->cfg->type;
> +
> + if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
> + !iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) {
> + dev_err(dev, "source channel does not support raw/scale\n");
> + return -EINVAL;
> + }
> +
> + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE);
> +
> + if (iio_channel_has_available(schan, IIO_CHAN_INFO_RAW))
> + chan->info_mask_separate_available |= BIT(IIO_CHAN_INFO_RAW);
> +
> + return 0;
> +}
> +
> +static int rescale_current_sense_amplifier_props(struct device *dev,
> + struct rescale *rescale)
> +{
> + u32 sense;
> + u32 gain_mult = 1;
> + u32 gain_div = 1;
> + u32 factor;
> + int ret;
> +
> + ret = device_property_read_u32(dev, "sense-resistor-micro-ohms",
> + &sense);
> + if (ret) {
> + dev_err(dev, "failed to read the sense resistance: %d\n", ret);
> + return ret;
> + }
> +
> + device_property_read_u32(dev, "sense-gain-mult", &gain_mult);
> + device_property_read_u32(dev, "sense-gain-div", &gain_div);
> +
> + /*
> + * Calculate the scaling factor, 1 / (gain * sense), or
> + * gain_div / (gain_mult * sense), while trying to keep the
> + * numerator/denominator from overflowing.
> + */
> + factor = gcd(sense, 1000000);
> + rescale->numerator = 1000000 / factor;
> + rescale->denominator = sense / factor;
> +
> + factor = gcd(rescale->numerator, gain_mult);
> + rescale->numerator /= factor;
> + rescale->denominator *= gain_mult / factor;
> +
> + factor = gcd(rescale->denominator, gain_div);
> + rescale->numerator *= gain_div / factor;
> + rescale->denominator /= factor;
> +
> + return 0;
> +}
> +
> +static int rescale_current_sense_shunt_props(struct device *dev,
> + struct rescale *rescale)
> +{
> + u32 shunt;
> + u32 factor;
> + int ret;
> +
> + ret = device_property_read_u32(dev, "shunt-resistor-micro-ohms",
> + &shunt);
> + if (ret) {
> + dev_err(dev, "failed to read the shunt resistance: %d\n", ret);
> + return ret;
> + }
> +
> + factor = gcd(shunt, 1000000);
> + rescale->numerator = 1000000 / factor;
> + rescale->denominator = shunt / factor;
> +
> + return 0;
> +}
> +
> +static int rescale_voltage_divider_props(struct device *dev,
> + struct rescale *rescale)
> +{
> + int ret;
> + u32 factor;
> +
> + ret = device_property_read_u32(dev, "output-ohms",
> + &rescale->denominator);
> + if (ret) {
> + dev_err(dev, "failed to read output-ohms: %d\n", ret);
> + return ret;
> + }
> +
> + ret = device_property_read_u32(dev, "full-ohms",
> + &rescale->numerator);
> + if (ret) {
> + dev_err(dev, "failed to read full-ohms: %d\n", ret);
> + return ret;
> + }
> +
> + factor = gcd(rescale->numerator, rescale->denominator);
> + rescale->numerator /= factor;
> + rescale->denominator /= factor;
> +
> + return 0;
> +}
> +
> +enum rescale_variant {
> + CURRENT_SENSE_AMPLIFIER,
> + CURRENT_SENSE_SHUNT,
> + VOLTAGE_DIVIDER,
> +};
> +
> +static const struct rescale_cfg rescale_cfg[] = {
> + [CURRENT_SENSE_AMPLIFIER] = {
> + .type = IIO_CURRENT,
> + .props = rescale_current_sense_amplifier_props,
> + },
> + [CURRENT_SENSE_SHUNT] = {
> + .type = IIO_CURRENT,
> + .props = rescale_current_sense_shunt_props,
> + },
> + [VOLTAGE_DIVIDER] = {
> + .type = IIO_VOLTAGE,
> + .props = rescale_voltage_divider_props,
> + },
> +};
> +
> +static const struct of_device_id rescale_match[] = {
> + { .compatible = "current-sense-amplifier",
> + .data = &rescale_cfg[CURRENT_SENSE_AMPLIFIER], },
> + { .compatible = "current-sense-shunt",
> + .data = &rescale_cfg[CURRENT_SENSE_SHUNT], },
> + { .compatible = "voltage-divider",
> + .data = &rescale_cfg[VOLTAGE_DIVIDER], },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rescale_match);
> +
> +static int rescale_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct iio_dev *indio_dev;
> + struct iio_channel *source;
> + struct rescale *rescale;
> + int sizeof_ext_info;
> + int sizeof_priv;
> + int i;
> + int ret;
> +
> + source = devm_iio_channel_get(dev, NULL);
> + if (IS_ERR(source)) {
> + if (PTR_ERR(source) != -EPROBE_DEFER)
> + dev_err(dev, "failed to get source channel\n");
> + return PTR_ERR(source);
> + }
> +
> + sizeof_ext_info = iio_get_channel_ext_info_count(source);
> + if (sizeof_ext_info) {
> + sizeof_ext_info += 1; /* one extra entry for the sentinel */
> + sizeof_ext_info *= sizeof(*rescale->ext_info);
> + }
> +
> + sizeof_priv = sizeof(*rescale) + sizeof_ext_info;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof_priv);
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + rescale = iio_priv(indio_dev);
> +
> + rescale->cfg = of_device_get_match_data(dev);
> + rescale->numerator = 1;
> + rescale->denominator = 1;
> +
> + ret = rescale->cfg->props(dev, rescale);
> + if (ret)
> + return ret;
> +
> + if (!rescale->numerator || !rescale->denominator) {
> + dev_err(dev, "invalid scaling factor.\n");
> + return -EINVAL;
> + }
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + rescale->source = source;
> +
> + indio_dev->name = dev_name(dev);
> + indio_dev->dev.parent = dev;
> + indio_dev->info = &rescale_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = &rescale->chan;
> + indio_dev->num_channels = 1;
> + if (sizeof_ext_info) {
> + rescale->ext_info = devm_kmemdup(dev,
> + source->channel->ext_info,
> + sizeof_ext_info, GFP_KERNEL);
> + if (!rescale->ext_info)
> + return -ENOMEM;
> +
> + for (i = 0; rescale->ext_info[i].name; ++i) {
> + struct iio_chan_spec_ext_info *ext_info =
> + &rescale->ext_info[i];
> +
> + if (source->channel->ext_info[i].read)
> + ext_info->read = rescale_read_ext_info;
> + if (source->channel->ext_info[i].write)
> + ext_info->write = rescale_write_ext_info;
> + ext_info->private = i;
> + }
> + }
> +
> + ret = rescale_configure_channel(dev, rescale);
> + if (ret)
> + return ret;
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static struct platform_driver rescale_driver = {
> + .probe = rescale_probe,
> + .driver = {
> + .name = "iio-rescale",
> + .of_match_table = rescale_match,
> + },
> +};
> +module_platform_driver(rescale_driver);
> +
> +MODULE_DESCRIPTION("IIO rescale driver");
> +MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
> +MODULE_LICENSE("GPL v2");

\
 
 \ /
  Last update: 2018-04-28 19:05    [W:0.128 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site