lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND] PCI/AER: Use a common function to print AER error bits
From
Date
On 4/17/2018 1:09 PM, Alexandru Gagniuc wrote:
> On errors reported from CPER, cper_print_bits() was used to log the
> AER bits. This resulted in hard-to-understand messages, without a
> prefix. Instead use __aer_print_error() for both native AER and CPER
> to provide a more consistent log format.
>
> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>

Thanks!
> ---
> drivers/pci/pcie/aer/aerdrv_errprint.c | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
> index cfc89dd57831..cfae4d52f848 100644
> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
> @@ -216,28 +216,30 @@ EXPORT_SYMBOL_GPL(cper_severity_to_aer);
> void cper_print_aer(struct pci_dev *dev, int aer_severity,
> struct aer_capability_regs *aer)
> {
> - int layer, agent, status_strs_size, tlp_header_valid = 0;
> + int layer, agent, tlp_header_valid = 0;
> u32 status, mask;
> - const char **status_strs;
> + struct aer_err_info info;
>
> if (aer_severity == AER_CORRECTABLE) {
> status = aer->cor_status;
> mask = aer->cor_mask;
> - status_strs = aer_correctable_error_string;
> - status_strs_size = ARRAY_SIZE(aer_correctable_error_string);
> } else {
> status = aer->uncor_status;
> mask = aer->uncor_mask;
> - status_strs = aer_uncorrectable_error_string;
> - status_strs_size = ARRAY_SIZE(aer_uncorrectable_error_string);
> tlp_header_valid = status & AER_LOG_TLP_MASKS;
> }
>
> layer = AER_GET_LAYER_ERROR(aer_severity, status);
> agent = AER_GET_AGENT(aer_severity, status);
>
> + memset(&info, 0, sizeof(info));
> + info.severity = aer_severity;
> + info.status = status;
> + info.mask = mask;
> + info.first_error = 0x1f;
> +
> pci_err(dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask);
> - cper_print_bits("", status, status_strs, status_strs_size);
> + __aer_print_error(dev, &info);
> pci_err(dev, "aer_layer=%s, aer_agent=%s\n",
> aer_error_layer[layer], aer_agent_string[agent]);
>

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2018-04-26 19:28    [W:0.093 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site