lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 08/10] dt-bindings: media: Document bindings for the Sunxi-Cedrus VPU driver
On Fri, Apr 20, 2018 at 09:22:20AM +0200, Paul Kocialkowski wrote:
> Hi and thanks for the review,
>
> On Fri, 2018-04-20 at 01:31 +0000, Tomasz Figa wrote:
> > Hi Paul, Philipp,
> >
> > On Fri, Apr 20, 2018 at 1:04 AM Philipp Zabel <p.zabel@pengutronix.de>
> > wrote:
> >
> > > Hi Paul,
> > > On Thu, 2018-04-19 at 17:45 +0200, Paul Kocialkowski wrote:
> > > > This adds a device-tree binding document that specifies the
> > > > properties
> > > > used by the Sunxi-Cedurs VPU driver, as well as examples.
> > > >
> > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > > > ---
> > > > .../devicetree/bindings/media/sunxi-cedrus.txt | 50
> >
> > ++++++++++++++++++++++
> > > > 1 file changed, 50 insertions(+)
> > > > create mode 100644
> >
> > Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/sunxi-
> > > > cedrus.txt
> >
> > b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> > > > new file mode 100644
> > > > index 000000000000..71ad3f9c3352
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> > > > @@ -0,0 +1,50 @@
> > > > +Device-tree bindings for the VPU found in Allwinner SoCs,
> > > > referred to
> >
> > as the
> > > > +Video Engine (VE) in Allwinner literature.
> > > > +
> > > > +The VPU can only access the first 256 MiB of DRAM, that are DMA-
> > > > mapped
> >
> > starting
> > > > +from the DRAM base. This requires specific memory allocation and
> >
> > handling.
> >
> > And no IOMMU? Brings back memories.
>
> Exactly, no IOMMU so we don't have much choice but cope with that
> hardware limitation...
>
> > > > +
> > > > +Required properties:
> > > > +- compatible : "allwinner,sun4i-a10-video-engine";
> > > > +- memory-region : DMA pool for buffers allocation;
> > > > +- clocks : list of clock specifiers, corresponding to
> >
> > entries in
> > > > + the clock-names property;
> > > > +- clock-names : should contain "ahb", "mod" and
> > > > "ram"
> >
> > entries;
> > > > +- assigned-clocks : list of clocks assigned to the VE;
> > > > +- assigned-clocks-rates : list of clock rates for the clocks
> > > > assigned
> >
> > to the VE;
> > > > +- resets : phandle for reset;
> > > > +- interrupts : should contain VE interrupt number;
> > > > +- reg : should contain register base and
> > > > length
> >
> > of VE.
> > > > +
> > > > +Example:
> > > > +
> > > > +reserved-memory {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + ranges;
> > > > +
> > > > + /* Address must be kept in the lower 256 MiBs of DRAM for
> > > > VE. */
> > > > + ve_memory: cma@4a000000 {
> > > > + compatible = "shared-dma-pool";
> > > > + reg = <0x4a000000 0x6000000>;
> > > > + no-map;
> > > > + linux,cma-default;
> > > > + };
> > > > +};
> > > > +
> > > > +video-engine@1c0e000 {
> > > This is not really required by any specification, and not as common
> > > as
> > > gpu@..., but could this reasonably be called "vpu@1c0e000" to follow
> > > somewhat-common practice?
> >
> > AFAIR the name is supposed to be somewhat readable for someone that
> > doesn't know the hardware. To me, "video-engine" sounds more obvious
> > than "vpu", but we actually use "codec" already, in case of MFC and
> > JPEG codec on Exynos. If encode/decode is the only functionality of
> > this block, I'd personally go with "codec". If it can do other things,
> > e.g. scaling/rotation without encode/decode, I'd probably call it
> > "video-processor".
>
> I agree that the term VPU is more commonly associated with video
> decoding, while video engine could mean a number of things.
>
> The reason I went with "video-engine" here (while still presenting the
> driver as a VPU driver) is that Video Engine is the term used in
> Allwinner's litterature. Other nodes in Allwinner device-trees generally
> stick to these terms (for instance, we have "display-engine" nodes).
> This also makes it easier to find the matching parts in the
> documentation.

'video-codec' is what is defined in the DT spec.

Rob

\
 
 \ /
  Last update: 2018-04-27 05:05    [W:0.096 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site