lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v2 3/4] ARM: davinci: add aemif & nand support to da850-lcdk in legacy mode
From
Date
On Wednesday 25 April 2018 02:44 PM, Bartosz Golaszewski wrote:
> 2018-04-17 16:09 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>> On Tuesday 17 April 2018 03:59 PM, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> We now have support for aemif & nand from board files. As an example
>>> add support for nand to da850-lcdk in legacy mode.
>>
>> Hawkboard is a separate board of its own, although closely related to
>> LCDK. Lets refer to it as hawkboard itself, instead of "LCDK in legacy
>> mode". So:
>>
>> ARM: davinci: omapl138-hawk: ...
>>
>>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>> ---
>>> arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
>>> 1 file changed, 132 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> index 6c997c59a3cd..9c3de56b54e4 100644
>>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> @@ -16,6 +16,11 @@
>>> #include <linux/gpio.h>
>>> #include <linux/gpio/machine.h>
>>> #include <linux/platform_data/gpio-davinci.h>
>>> +#include <linux/platform_data/ti-aemif.h>
>>> +#include <linux/mtd/rawnand.h>
>>> +#include <linux/mtd/partitions.h>
>>> +#include <linux/platform_data/mtd-davinci.h>
>>> +#include <linux/platform_data/mtd-davinci-aemif.h>
>>> #include <linux/regulator/machine.h>
>>>
>>> #include <asm/mach-types.h>
>>> @@ -162,6 +167,129 @@ static __init void omapl138_hawk_mmc_init(void)
>>> gpiod_remove_lookup_table(&mmc_gpios_table);
>>> }
>>>
>>> +static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
>>> + {
>>> + .name = "u-boot env",
>>> + .offset = 0,
>>> + .size = SZ_128K,
>>> + .mask_flags = MTD_WRITEABLE,
>>> + },
>>> + {
>>> + .name = "u-boot",
>>> + .offset = MTDPART_OFS_APPEND,
>>> + .size = SZ_128K,
>>
>> Can you make it 512K as it is in da850-lcdk.dts ?
>>
>>> + .mask_flags = MTD_WRITEABLE,
>>> + },
>>> + {
>>> + .name = "free space",
>>> + .offset = MTDPART_OFS_APPEND,
>>> + .size = MTDPART_SIZ_FULL,
>>> + .mask_flags = 0,
>>> + },
>>> +};
>>
>>> +static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
>>> + {
>>> + .cs = 3,
>>> + }
>>> +};
>>> +
>>> +static struct platform_device omapl138_hawk_aemif_devices[] = {
>>> + {
>>> + .name = "davinci_nand",
>>> + .id = 1,
>>
>> Is there a reason for .id to be set to 1 here? Ideally it should be -1,
>> I think since there is a single NAND on the board.
>>
>
> The davinci nand driver uses pdev->id as the chipselect number. I
> guess this should be in the platform data. I'll send a patch for that.

I remember that now. No need to change that, I think. Just a comment
here would suffice.

Thanks,
Sekhar

\
 
 \ /
  Last update: 2018-04-25 11:21    [W:3.580 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site