lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/5] drm/arm/malidp: Enable/disable interrupts in runtime pm
Date
Display and scaling engine interrupts need to be disabled when the
runtime pm invokes malidp_runtime_pm_suspend(). Conversely, they
need to be enabled in malidp_runtime_pm_resume().

This patch depends on:
https://lkml.org/lkml/2017/5/15/695

Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com>
Reported-by: Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com>

---
Changes in v3:-
- Abandoned https://patchwork.kernel.org/patch/10357213/ bacause scaling (aka
writeback) interrupts are enabled or disabled when a commit posts a scene
with or without writeback framebuffer respectively. This causes an issue in the
following sequence:-
(It is to be noted that scaling engine interrupts are used for writeback)
1. Commit with writeback attached.
2. Before writeback finishes, commit without writeback, which calls
disable_writeback -> disable scaling interrupts (ie clears the scaling
interrupt mask).
3. Scaling (ie for writeback completion) interrupt is called for commit
in step 1. However, as the scaling interrupt mask has been cleared by
step 2, so writeback completion is not signalled to userspace app.
This is a BUG.

Changes in v2:-
- Removed the change id
---
drivers/gpu/drm/arm/malidp_drv.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
index f7a8beb..983b854 100644
--- a/drivers/gpu/drm/arm/malidp_drv.c
+++ b/drivers/gpu/drm/arm/malidp_drv.c
@@ -470,6 +470,8 @@ static int malidp_runtime_pm_suspend(struct device *dev)
/* we can only suspend if the hardware is in config mode */
WARN_ON(!hwdev->hw->in_config_mode(hwdev));

+ malidp_se_irq_fini(hwdev);
+ malidp_de_irq_fini(hwdev);
hwdev->pm_suspended = true;
clk_disable_unprepare(hwdev->mclk);
clk_disable_unprepare(hwdev->aclk);
@@ -488,6 +490,8 @@ static int malidp_runtime_pm_resume(struct device *dev)
clk_prepare_enable(hwdev->aclk);
clk_prepare_enable(hwdev->mclk);
hwdev->pm_suspended = false;
+ malidp_de_irq_hw_init(hwdev);
+ malidp_se_irq_hw_init(hwdev);

return 0;
}
--
2.7.4
\
 
 \ /
  Last update: 2018-04-24 20:14    [W:0.073 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site