lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: sun8i-h3-libretech-all-h3-cc: Move board definition to common dtsi
Date
Since the libretech-all-h3-cc can use either the H2+, H3 or H5, move the
content of the dts file to a common dtsi file to be included by the H3 variant
and in a following patch the H5 variant.

By the way, update the SPDX licence tag position.

Suggested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 209 +-------------------
arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi | 211 +++++++++++++++++++++
2 files changed, 213 insertions(+), 207 deletions(-)
create mode 100644 arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi

diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index b20a710..50f2fb3 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -1,218 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/

/dts-v1/;
#include "sun8i-h3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-libretech-all-h3-cc.dtsi"

/ {
model = "Libre Computer Board ALL-H3-CC H3";
compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr_led {
- label = "librecomputer:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
-
- status_led {
- label = "librecomputer:blue:status";
- gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- power {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- };
- };
-
- reg_vcc1v2: vcc1v2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&reg_vcc5v0>;
- };
-
- /* This represents the board's 5V input */
- reg_vcc5v0: vcc5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_vcc_dram: vcc-dram {
- compatible = "regulator-fixed";
- regulator-name = "vcc-dram";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
- enable-active-high;
- };
-
- reg_vcc_io: vcc-io {
- compatible = "regulator-fixed";
- regulator-name = "vcc-io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc3v3>;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
- };
-
- reg_vdd_cpux: vdd-cpux {
- compatible = "regulator-fixed";
- regulator-name = "vdd-cpux";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&reg_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-};
-
-&codec {
- allwinner,audio-routing =
- "Line Out", "LINEOUT",
- "MIC1", "Mic",
- "Mic", "MBIAS";
- status = "okay";
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <&reg_vcc_io>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- /* VBUS on USB ports are always on */
- usb0_vbus-supply = <&reg_vcc5v0>;
- usb1_vbus-supply = <&reg_vcc5v0>;
- usb2_vbus-supply = <&reg_vcc5v0>;
- usb3_vbus-supply = <&reg_vcc5v0>;
- status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 0000000..ff42c16
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr_led {
+ label = "librecomputer:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+
+ status_led {
+ label = "librecomputer:blue:status";
+ gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+ };
+
+ reg_vcc1v2: vcc1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_vcc5v0>;
+ };
+
+ /* This represents the board's 5V input */
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vcc_dram: vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-dram";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ enable-active-high;
+ };
+
+ reg_vcc_io: vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc3v3>;
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ };
+
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpux";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc_io>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ /* VBUS on USB ports are always on */
+ usb0_vbus-supply = <&reg_vcc5v0>;
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ usb2_vbus-supply = <&reg_vcc5v0>;
+ usb3_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
--
2.7.4
\
 
 \ /
  Last update: 2018-04-24 11:23    [W:1.070 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site