lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 2/8] dt-bindings: display: atmel: optional video-interface of endpoints
    Date
    With bus-type/bus-width properties in the endpoint nodes, the video-
    interface of the connection can be specified for cases where the
    heuristic fails to select the correct output mode. This can happen
    e.g. if not all RGB pins are routed on the PCB; the driver has no
    way of knowing this, and needs to be told explicitly.

    This is critical for the devices that have the "conflicting output
    formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
    RGB bits move around depending on the selected output mode. For
    devices that do not have the "conflicting output formats" issue
    (SAMA5D2, SAMA5D4), this is completely irrelevant.

    Signed-off-by: Peter Rosin <peda@axentia.se>
    ---
    .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 ++++++++++++++++++++++
    1 file changed, 26 insertions(+)

    diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
    index 82f2acb3d374..9de434a8f523 100644
    --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
    +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
    @@ -15,6 +15,14 @@ Required children nodes:
    to external devices using the OF graph reprensentation (see ../graph.txt).
    At least one port node is required.

    +Optional properties in grandchild nodes:
    + Any endpoint grandchild node may specify a desired video interface
    + according to ../../media/video-interfaces.txt, specifically
    + - bus-type: must be <0>.
    + - bus-width: recognized values are <12>, <16>, <18> and <24>, and
    + override any output mode selection heuristic, forcing "rgb444",
    + "rgb565", "rgb666" and "rgb888" respectively.
    +
    Example:

    hlcdc: hlcdc@f0030000 {
    @@ -50,3 +58,21 @@ Example:
    #pwm-cells = <3>;
    };
    };
    +
    +
    +Example 2: With a video interface override to force rgb565; as above
    +but with these changes/additions:
    +
    + &hlcdc {
    + hlcdc-display-controller {
    + pinctrl-names = "default";
    + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
    +
    + port@0 {
    + hlcdc_panel_output: endpoint@0 {
    + bus-type = <0>;
    + bus-width = <16>;
    + };
    + };
    + };
    + };
    --
    2.11.0
    \
     
     \ /
      Last update: 2018-04-23 09:27    [W:2.446 / U:0.068 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site