lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next 2/2] ipv6: sr: Compute flowlabel of outer IPv6 header for seg6 encap mode
Date
ECMP (equal-cost multipath) hashes are typically computed on the
packets' 5-tuple(src IP, dst IP, src port, dst port, L4 proto).

For encapsulated packets, the L4 data is not readily available and
ECMP hashing will often revert to (src IP, dst IP). This will lead
to traffic polarization on a single ECMP path, causing congestion
and waste of network capacity.

In IPv6, the 20-bit flow label field is also used as part of the
ECMP hash. In the lack of L4 data, the hashing will be on (src IP,
dst IP, flow label).

Having a non-zero flow label is thus important for proper traffic
load balancing when L4 data is unavailable (i.e., when packets are
encapsulated)

Currently, the seg6_do_srh_encap() function extracts the original
packet's flow label and set it as the outer IPv6 flow label. There
are two issues with this behaviour:

a) There is no guarantee that the inner flow label will be set
by the source.

b) If the original packet is not IPv6, the flow label will be set
to zero (e.g., IPv4 or L2 encap).

This patch adds a function, named seg6_make_flowlabel(), that
computes a flow label from a given skb. It supports IPv6, IPv4
and L2 payloads, and leverages the per namespace "seg6_flowlabel"
sysctl value.

This patch has been tested for IPv6, IPv4, and L2 traffic.

Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
---
net/ipv6/seg6_iptunnel.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 5fe1394..3d9cd86 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -91,6 +91,24 @@ static void set_tun_src(struct net *net, struct net_device *dev,
rcu_read_unlock();
}

+/* Compute flowlabel for outer IPv6 header */
+__be32 seg6_make_flowlabel(struct net *net, struct sk_buff *skb,
+ struct ipv6hdr *inner_hdr)
+{
+ int do_flowlabel = net->ipv6.sysctl.seg6_flowlabel;
+ __be32 flowlabel = 0;
+ u32 hash;
+
+ if (do_flowlabel > 0) {
+ hash = skb_get_hash(skb);
+ rol32(hash, 16);
+ flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK;
+ } else if (!do_flowlabel && skb->protocol == htons(ETH_P_IPV6)) {
+ flowlabel = ip6_flowlabel(inner_hdr);
+ }
+ return flowlabel;
+}
+
/* encapsulate an IPv6 packet within an outer IPv6 header with a given SRH */
int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
{
@@ -99,6 +117,7 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
struct ipv6hdr *hdr, *inner_hdr;
struct ipv6_sr_hdr *isrh;
int hdrlen, tot_len, err;
+ __be32 flowlabel;

hdrlen = (osrh->hdrlen + 1) << 3;
tot_len = hdrlen + sizeof(*hdr);
@@ -119,12 +138,13 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
* decapsulation will overwrite inner hlim with outer hlim
*/

+ flowlabel = seg6_make_flowlabel(net, skb, inner_hdr);
if (skb->protocol == htons(ETH_P_IPV6)) {
ip6_flow_hdr(hdr, ip6_tclass(ip6_flowinfo(inner_hdr)),
- ip6_flowlabel(inner_hdr));
+ flowlabel);
hdr->hop_limit = inner_hdr->hop_limit;
} else {
- ip6_flow_hdr(hdr, 0, 0);
+ ip6_flow_hdr(hdr, 0, flowlabel);
hdr->hop_limit = ip6_dst_hoplimit(skb_dst(skb));
}

--
2.1.4
\
 
 \ /
  Last update: 2018-04-23 23:38    [W:0.204 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site