lkml.org 
[lkml]   [2018]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 0/3] lan78xx: Read configuration from Device Tree
From
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 19 Apr 2018 17:59:37 +0100

> The Microchip LAN78XX family of devices are Ethernet controllers with
> a USB interface. Despite being discoverable devices it can be useful to
> be able to configure them from Device Tree, particularly in low-cost
> applications without an EEPROM or programmed OTP.
>
> This patch set adds support for reading the MAC address and LED modes from
> Device Tree.
>
> v4:
> - Rename nodes in bindings doc.
>
> v3:
> - Move LED setting into PHY driver.
>
> v2:
> - Use eth_platform_get_mac_address.
> - Support up to 4 LEDs, and move LED mode constants into dt-bindings header.
> - Improve bindings document.
> - Remove EEE support.

Series applied, thanks Phil.

\
 
 \ /
  Last update: 2018-04-20 17:40    [W:0.051 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site