lkml.org 
[lkml]   [2018]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/6] dt-bindings: clock: add DDR3 standard speed bins.
Date
Hi Enric,

Am Donnerstag, 19. April 2018, 13:30:16 CEST schrieb Enric Balletbo i Serra:
> On 19/04/18 13:10, Heiko Stuebner wrote:
> > Am Donnerstag, 19. April 2018, 12:40:15 CEST schrieb Enric Balletbo i Serra:
> >> DDR3 SDRAM Standard (JESD79-3F) defines some standard speed bins for
> >> DDR3 memories. The devfreq/rk3399_dmc.txt binding refers to this file
> >> which does not exist, so add a ddr.h file with the standard speed bins
> >> for DDR3.
> >>
> >> Fixes: c1ceb8f7c167 (Documentation: bindings: add dt documentation for rk3399 dmc)
> >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >> ---
> >>
> >> include/dt-bindings/clock/ddr.h | 34 +++++++++++++++++++++++++++++++++
> >> 1 file changed, 34 insertions(+)
> >> create mode 100644 include/dt-bindings/clock/ddr.h
> >>
> >> diff --git a/include/dt-bindings/clock/ddr.h b/include/dt-bindings/clock/ddr.h
> >> new file mode 100644
> >> index 000000000000..506aef7e609e
> >> --- /dev/null
> >> +++ b/include/dt-bindings/clock/ddr.h
> >> @@ -0,0 +1,34 @@
> >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> >> +
> >> +#ifndef DT_BINDINGS_DDR_H
> >> +#define DT_BINDINGS_DDR_H
> >> +
> >> +/* DDR3-800 Standard Speed Bins */
> >> +#define DDR3_800D 15
> >> +#define DDR3_800E 18
> >> +/* DDR3-1066 Standard Speed Bins */
> >> +#define DDR3_1066E 18
> >> +#define DDR3_1066F 21
> >> +#define DDR3_1066G 24
> >
> > looking at the mentioned jedec standard, I don't see where these numerical
> > values are defined in the standard itself. [I may be blind though]
> >
>
> Damm it. No, you're not blind. I did an horrible mistake adding an old version
> of this file. It's wrong, that is supposed to be there is DDR3 table available
> in the ATF [1] not this.

Mistakes can always happen ... so no problem :-) .


> /* 5-5-5 */
> DDR3_800D = 0,
> /* 6-6-6 */
> DDR3_800E = 1,
> /* 6-6-6 */
> DDR3_1066E = 2,
> /* 7-7-7 */
> DDR3_1066F = 3,
> ...
>
> The value is passed directly to the ATF so the above values are the correct.
>
> One question that I have on my mind is if this file should be called as is or if
> will be better name as atf-ddr.h or something like that.
> ddr.h -> atf-ddr.h

The more interesting question would be if this isn't a very much rockchip
or even rk3399-specific scheme. So such a generic header name looks very
much out of place (also including the very generic constant names).

So far the only upstream ATF implementation is for the rk3399.


Heiko

>
> [1]
> https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/rockchip/rk3399/drivers/dram/dram_spec_timing.h
>
> Sorry about that. Guess it's needed a v2 but let's wait a little bit for if more
> discussion arises.
>
> Best regards,
> Enric
>
> > Could you explain a bit more where these numerical values are coming from?
> >
> >
> > Thanks
> > Heiko
> >
>
>


\
 
 \ /
  Last update: 2018-04-20 12:59    [W:0.023 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site