lkml.org 
[lkml]   [2018]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
From
Date
Hi Viresh,

On 4/2/2018 8:37 PM, Sricharan R wrote:
> Hi Viresh,
>
> On 4/2/2018 3:00 PM, Viresh Kumar wrote:
>> +Sricharan,
>>
>> On 30-03-18, 00:26, Ilia Lin wrote:
>>> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>>> that have KRYO processors, the CPU ferequencies subset and voltage value
>>> of each OPP varies based on the silicon variant in use.
>>> Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>>> defines the voltage and frequency value based on the msm-id in SMEM
>>> and speedbin blown in the efuse combination.
>>> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>>> to provide the OPP framework with required information.
>>> This is used to determine the voltage and frequency value for each OPP of
>>> operating-points-v2 table when it is parsed by the OPP framework.
>>>
>>> This change adds documentation.
>>>
>>> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
>>> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
>>> ---
>>> .../devicetree/bindings/cpufreq/kryo-cpufreq.txt | 693 +++++++++++++++++++++
>>> 1 file changed, 693 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>
>> This should really go in opp directory.
>>
>>> new file mode 100644
>>> index 0000000..20cef9d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>> @@ -0,0 +1,693 @@
>>> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
>>> +===================================
>>> +
>>> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>>> +that have KRYO processors, the CPU ferequencies subset and voltage value
>>> +of each OPP varies based on the silicon variant in use.
>>> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>>> +defines the voltage and frequency value based on the msm-id in SMEM
>>> +and speedbin blown in the efuse combination.
>>> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>>> +to provide the OPP framework with required information (existing HW bitmap).
>>> +This is used to determine the voltage and frequency value for each OPP of
>>> +operating-points-v2 table when it is parsed by the OPP framework.
>>> +
>>> +Required properties:
>>> +--------------------
>>> +In 'cpus' nodes:
>>> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
>>> +
>>> +In 'operating-points-v2' table:
>>> +- compatible: Should be
>>> + - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
>>> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
>>> + efuse registers that has information about the
>>> + speedbin that is used to select the right frequency/voltage
>>> + value pair.
>>> + Please refer the for nvmem-cells
>>> + bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
>>> + and also examples below.
>>
>> Sricharan is also working on adding these, just make sure you guys do the same
>> thing..
>>
Right, i was adding a similar one for krait cores [1]. There is code common in the
init sequence across both (little). Do you suggest to make them common ?

Regards,
Sricharan

[1] https://patchwork.kernel.org/patch/10261873/

--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-04-03 04:43    [W:0.107 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site