lkml.org 
[lkml]   [2018]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] IB/hfi1: Try slot reset before secondary bus reset
[+cc Alex, who might know why DRM drivers have their own PCIe Gen3 code]

On Thu, Apr 19, 2018 at 02:26:32PM -0600, Jason Gunthorpe wrote:
> On Thu, Apr 19, 2018 at 03:56:23PM -0400, Sinan Kaya wrote:
> > The infiniband adapter might be connected to a PCI hotplug slot. Performing
> > secondary bus reset on a hotplug slot causes PCI link up/down interrupts.
> >
> > Hotplug driver removes the device from system when a link down interrupt
> > is observed and performs re-enumeration when link up interrupt is observed.
> >
> > This conflicts with what this code is trying to do. Try secondary bus reset
> > only if pci_reset_slot() fails/unsupported.
> >
> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> > drivers/infiniband/hw/hfi1/pcie.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
> > index 83d66e8..75f49e3 100644
> > +++ b/drivers/infiniband/hw/hfi1/pcie.c
> > @@ -908,7 +908,8 @@ static int trigger_sbr(struct hfi1_devdata *dd)
>
> The code above this hunk is:
>
> /*
> * Trigger a secondary bus reset (SBR) on ourselves using our parent.
> *
> * Based on pci_parent_bus_reset() which is not exported by the
> * kernel core.
> */
> static int trigger_sbr(struct hfi1_devdata *dd)
> {
>
> [..]
>
> This really seems like something the PCI core should be helping with,
> drivers shouldn't be doing stuff like this. I get the feeling this
> should be a common need if drivers support various error recovery
> schemes?
>
> Bjorn, would be appropriate to export pci_parent_bus_reset() or some
> variation therin??

I agree it would be really nice if the PCI core could help out somehow
so we could get some of this code out of individual drivers.

If fact, stepping back a few paces, this HFI reset path is part of a
transition to PCIe gen3 signaling, and I'm not sure why *that* is in
the driver either.

There's an ongoing discussion [1] about why this gen3 code is in the
driver. Several DRM drivers include similar code
(cik_pcie_gen3_enable(), si_pcie_gen3_enable()).

I *thought* the hardware was supposed to automatically negotiate to
the highest rate supported by both sides without any help at all from
software. But since several drivers have code to do it themselves, I
wonder if I'm missing something, or maybe there's something the PCI
core should be doing that it isn't, and the driver code is basically
working around that PCI core deficiency.

[1] https://lkml.kernel.org/r/20180417171956.GJ28657@bhelgaas-glaptop.roam.corp.google.com

\
 
 \ /
  Last update: 2018-04-19 23:47    [W:0.124 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site