lkml.org 
[lkml]   [2018]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] lan78xx: Read configuration from Device Tree
Date
The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.

This patch set adds support for reading the MAC address and LED modes from
Device Tree.

v3:
- Move LED setting into PHY driver.

v2:
- Use eth_platform_get_mac_address.
- Support up to 4 LEDs, and move LED mode constants into dt-bindings header.
- Improve bindings document.
- Remove EEE support.

Phil Elwell (3):
lan78xx: Read MAC address from DT if present
lan78xx: Read LED states from Device Tree
dt-bindings: Document the DT bindings for lan78xx

.../devicetree/bindings/net/microchip,lan78xx.txt | 54 ++++++++++++++++
MAINTAINERS | 2 +
drivers/net/phy/microchip.c | 25 ++++++++
drivers/net/usb/lan78xx.c | 74 +++++++++++++++-------
include/dt-bindings/net/microchip-lan78xx.h | 21 ++++++
include/linux/microchipphy.h | 3 +
6 files changed, 156 insertions(+), 23 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
create mode 100644 include/dt-bindings/net/microchip-lan78xx.h

--
2.7.4

\
 
 \ /
  Last update: 2018-04-19 16:34    [W:0.033 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site